International Journal Papers

1.  Sudhanshu Nartma, Sandip Budhe, Jinu Paul. Carbon fiber/epoxy vitrimer composite material for pressure vessels: Towards development of sustainable materials. Material Science Forum; 1123:89-93, 2024.
2. Pramokumar B, Sandip Budhe, “The effect of graphene oxide on thermal, electrical and mechanical properties of carbon/epoxy composites: Towards multifunctional composite material”. Journal of Polymer Composites; 45(7):6374-6384.
3. M. Khaise, N. R. Rohem, S. de Barros, M. D. Banea and S. Budhe merical analysis of repaired wall loss defect pipelines for optimum composite wrap thickness Journal of Frattura ed Integrità Strutturale, 2023.
4. V.M.Afnas, G.Unnikrishnan, S. Budhe,O.manaf, Ameen.J, PVA/Gelatin/Chitin Ternary Blend as a Humidity Sensing Material, Journal of   Materials Science: Materials in Electronics, 2022. 33, 2031-2043.
5. Arjun K P, S. de Barros, S. Budhe, Theoretical Determination of Elastic and Flexural Modulus for Inter-ply and Intra-ply Hybrid Composite Material. Composite Structure, 281, 114971, 2021.
6. S. Budhe, M.D. Banea, S. de Barros. Analysis of Failure Pressure of Defective Pipes Repaired with Composite Systems Considering the Plastic Deformation of Pipe. Journal of the Institution of Engineers (India)Series C, vol.101, pp. 929-936 (2020).
7. S. Budhe, M.D. Banea, S. de Barros. Prediction of the burst pressure for defective pipelines using different semi-empirical models. Frattura ed Integrita strutturale, Vol. 14 No. 52 (2020): April 2020.
8. S. Budhe, M.D. Banea, S. de Barros. Effect of heat treatment on the behaviour of teak wood adherend bonded joints. Applied adhesion Science, 8:1 (2020).
9. S. Budhe, M.D. Banea, S. de Barros. Composite repair system for corroded pipelines: an overview of recent developments and modelling. Journal of Marine Science and Technology, vol. 25, pp.1308-1323 (2020).
10. S. Budhe, M.D. Banea, S. de Barros. Prediction of Failure Pressure for Defective Pipelines Reinforced with Composite System, Accounting for Pipe Extremities. Journal of Failure Analysis and Prevention, vol. 19, pp.1832-1843 (2019).
11. Zugliani P. A, Banea M.D, Budhe S, Carbas R.J, da Silva L.F.M, Rohem N.R.F, de Barros S. Bonded composite repair of metallic pipeline using energy release rate method. Journal of Adhesion Science and Technology, vol. 33:19, pp. 2141-2156, (2019).
12. Budhe, S., de Barros, S., Banea, M.D. Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites. Journal of Brazilian Society of Mechanical Science of Engineering, Vol-41(263), pp:110, (2019).
13. S. Budhe, M.D. Banea, S. de Barros, Bonded repair of composite structures in aerospace application: A review on environmental issues. Applied Adhesion Science, vol:6(3), pp:1-27, (2018).
14. S. Budhe, M. D. Banea, N. R. F. Rohem, S. de Barros.  Assessment of failure pressure of a GFRP composite repair system for wall loss defect in metallic pipelines, Material Science and Engineering Technology Journal. Vol-49, pp:110, (2018). 
15. Jordi Renart, S. Budhe, L. Carreras, J.A. Mayugo, J. Costa,  A new testing device to simultaneously measure the mode I fatigue delamination behavior of a batch of specimens. International journal of fatigue, vol 116, pp:275-283, (2018). 
16. Marcio M Arouche, S. Budhe, M.D. Banea, Sofia T. de Freitas, Silvio de Barros, Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests. Part L Journal of Materials: Design and Applications. vol. 233(8), pp. 1555-1563, (2019).
17. Silvio de Barros, S. Budhe, M.D. Banea, Ney R.F. Rohem, E.M. Sampaio, Valber A. Perrut, Luiz D.M. Lana. An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe. Frattura ed Integrita Strutturale. Vol. 44, pp:151-160, (2018). 
18. Marcio A. Arouche, S. Budhe, M.D. Banea, Sofia de Freitas, Silvio de Barros, Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests, Journal of the Brazilian Society of Mechanical Sciences and Engineering vol. 40 (1), (2018). 
19. S. Budhe, M.D. Banea, N.R.F. Rohem, E.M. Sampaio, S. de Barros. Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines. Composite structure, vol 176, pp:1013-1019, (2017). 
20. S. Teixeira de Freitas, M.D. Banea, S. Budhe, S. de Barros. Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests. Composite structure, vol 164, pp 68-75, (2017).
21. S. Budhe, M.D. Banea, S. de Barros, L.F.M. da Silva. An updated review of adhesively bonded joints in composite materials. International Journal of Adhesion and Adhesives, vol -72, pp: 30-42, (2017).
22. S. De Barros, M. D. Banea, S. Budhe, C. E. R. De Siqueira, B. S. P Lobão & L.F.G. Souza. Experimental analysis of metal-composite repair of floating offshore units (FPSO). The Journal of Adhesion Vol. 93,(1-2), pp:147-158, (2017).
23. S. De Barros, P.P. Kenedi, S.M. Ferreira, S. Budhe, A.J. Bernardino & L.F.G.souza. Influence of Mechanical Surface Treatment on Fatigue Life of Bonded Joints. Journal of Adhesion, vol-93 (8),pp: 599-612, (2017)
24. Ghumatkar, S. Budhe,  R. Sekhar, M.D. Banea, S. de Barros. Influence of Adherend Surface Roughness on the Adhesive Bond Strength. Latin American Journal of Solids and Structures vol. 16(13), pp:1-15, (2016).
25. N.R.F.Rohem, L.J.Pacheco, S. Budhe, M.D.Banea. E.M.Sampaio, S.de Barros.  Development and qualification of a new polymeric matrix laminated composite for pipe repair, composite structure. vol 152, pp: 737-745, (2016).
26. J. Renart, P. Vicens, S. Budhe, J. Costa, J.A. Mayugo, A.Rodriguez-Bellido. An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen’s compliance. International journal of fatigue, vol 82 (3), pp:634-642, (2016).
27. S. Budhe, A. Ghumatkar, N. Birajdar and M. D. Banea. Effect of surface roughness using different adherend materials on the adhesive bond strength. Applied adhesion science, vol-3(20), pp:1-10, (2015).
28. S. Budhe, A. Rodriguez-Bellido, J. Renart, J. A. Mayugo, J. Costa. Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs. International Journal of Adhesion and Adhesives, vol(49), pp:80-89, (2014).

International Conference

1. M. Khaise, S. Budhe, “Failure pressure strength of wall loss defective pipelines repaired with composite fiber reinformced polymer” International Conference on Composites: Design, Processing, and Health Monitoring (ICDPHM2024), IIT Mandi, 20-21 June 2024.
2. Sudhanshu Nartam, Sandip Budhe, and Jinu Paul, “Retention of mechanical properties of carbon/fiber epoxy vitrimer composite material: Towards recyclable and reusable carbon fibe” International Conference on Composites: Design, Processing, and Health Monitoring (ICDPHM2024), IIT Mandi, 20-21 June 2024.
3. Sudhanshu Nartam, Sandip Budhe, Jinu Paul, “Carbon Fiber/Epoxy Vitrimer Composite Material for Pressure Vessels: Towards Development of Sustainable Materials” 9th International Conference on Composite Materials and Material Engineering (ICCMME2024),  Singapore, January 14-16, 2024.
4. Pramodkumar B, Sandip Budhe, “ Effect of Graphene oxide nanofiller on mechanical properties of carbon fiber epoxy composite” 1st International Conference on Mechanical Engineering: Researches and Evolutionary Challenges (ICMech-REC-2023), NIT Warangal, 23 - 25 June 2023
5. Vishal Rautela, Sekar K, Sandip Budhe, “Mechanical properties of vitrimer-based carbon composites: Towards sustainable and reusable material” 1st International Conference on Mechanical Engineering: Researches and Evolutionary Challenges (ICMech-REC-2023), NIT Warangal, 23 - 25 June 2023
6. M. Khaise, N. R. Rohem, S. de Barros, S. Budhe, Failure analysis of composite repaired pipe for optimum composite thickness using numerical modelling. 8th Asian Conference on Mechanics of Functional Materials and Structures 2022, IIT Guwahati December 2022
7. Arjun P Suresh, S Budhe , K Sekar, Assessment of ply sequencing on the mechanical performance of hybrid composite materials. Second International Conference on Materials Science and Engineering (ICMSE 2022), NIT Jalandhar, June 22.
8. V.M. Afnas, S.Budhe, G. Unnikrishnan , PVA/Gelatin/Chitin as a Humidity Sensing Material?. International Conference on advances in Polymer Technology, Cochin, Kerala, May 27-29, 2021
9. K.P. Arjun, S. Budhe, S. de Barros. Mechanical Performance of Natural Interlaminar and Intralaminar Hybrid Composite Materials. IAMaC 2021, Porto, Portugal July 2021.
10. Mariana Doina Banea, Sandip Budhe, Silvio de Barros. Predicting the elastic modulus of natural fiber hybrid composite using classical lamination theory. European Latin American Conference of Theoretical and Applied Mechanics, Havana, Cuba, 2019.
11. P. A. Zugliani, S. Budhe,M. D. Banea, R.J.C Carbas, LFM da Silva, S. de Barros. Prediction of failure pressure in bonded composite repaired pipes using the energy release rate method. 4^th International Conference on Structural Adhesive Bonding, Porto, Portugal, 2017.
12. M.M. Arouche, S. Budhe, S.T. de Freitas, M.D. Banea, S. de Barros. Interface adhesion performance of composite-to-composite bonded joints under salt water condition. 4^th International Conference on Structural Adhesive Bonding, Porto, Portugal, 2017.
13. Pedro A. Zugliani, S. Budhe,M. D. Banea,  S. de Barros. Failure pressure analysis of composite repair of metallic pipe with wall loss defect.  6th International Symposium on Solid Mechanics – MecSol, Joinville, Brazil, 2017.
14. Lais A. Alves, Márcio M. Arouche, S. Budhe, Sofia Teixeira de Freitas, M.D. Banea, Silvio de Barros. Adhesion performance of composite-to-metal bonded joints under salt spray and salt water condition. 3rd EMI International conference, Rio de Janeiro, Brazil 2017.
15. C. E. R. De Siqueira, B. S. P Lobão,  F. Marques, L.F.G. Souza, S. Budhe, M. D. Banea, S. De Barros. Fatigue-Three point bending test for composite repair structures. CLBA Conference, Rio de Janeiro, Brazil, 2016
16. S. Budhe, N. Birajdar, M. D. Banea. Experimental study on effect of surface roughness of adherend on the adhesive bond strength. CLBA Conference, Rio de Janeiro, January 2016
17. S. de Barros, Sofia Teixeira de Freitas, Mariana D. Banea, S. Budhe, Márcio M. Arouche, Bruno L. dos Santos. Adhesion quality of steel-CFRP interface bonding. BCCM-3 – Brazilian Conference on Composite Materials, Gramado, 2016.
18. A.Ghumatkar, S. Budhe,  R. Sekhar. Experimental study on different adherend surface roughness on the adhesive bond strength. International Conference on Advancements in Materials for Manufacturing, Hyderabad, India, 2016.
19. S. Teixeira de Freitas, M.D. Banea, S. Budhe, S. de Barros. Interface adhesion quality between steel-CFRP bonding. 19^thInternational Conference on Composite Structures, Portugal, Porto, 2016.
20. Ghumatkar, S. Budhe,  R. Sekhar. Effect of heat treatment and surface roughness of adherend material on adhesive bond strength. Global Conference on Flexible Systems Management, GLO GIFT, Pune, India, 2015
21. E. R. De Siqueira, D. J. Schmdit,  B. S. P Lobão,  S. Budhe, L.F.G. Souza, S. De Barros. Experimental analysis of composite-metal joints, Meeting on Aeronautical Composite Materials and Structures. Meeting on Aeronautical Composite Materials and Structures – MACMS, Sao Paulo, Brazil, 2015.
22. Rodríguez-Bellido, S. Budhe, J. Renart, J. Costa. On the effect of pre-bond moisture in the adherents fracture toughness of bonded joints for composite repairs. 16^th European Conference on Composite Materials, Seville, Spain, 2014.
23. J. Renart, S. Budhe, Josep. Costa, A. Rodríguez-Bellido. A multiple specimen methodology for crack growth under fatigue loading of doublécantileve beam specimens. 16^th European Conference on Composite Materials, Seville, Spain, 2014.
24. S. Budhe, A. Rodríguez-Bellido, J. Renart, J. Costa. The effect of pre-bond moisture and temperature on the fracture toughness of bonded joints for composite repairs. 6^th International conference on composites testing and model Identification, Aalborg, Denmark, 2013.
25. Ana Rodríguez-Bellido, S.  Budhe, JordiRenart, Josep Costa. Study of the influence of the pre-bond moisture content of the adherents on the fracture toughness of bonded joints for composite repairs. SAMPE International Symposium and Exhibition- Emerging Opportunities: Materials and Process Solutions; Baltimore, MD; United States, 2012.
26. Ana Rodríguez-Bellido, S. Budhe, JordiRenart, Josep Costa. Study of adherent conditioning on the fracture toughness of bonded joints for composite repairs. 15^th European Conference on Composite Materials, Venice, Italy, 2012.
27. K. Acharyya, Arun Chattopadhyay , S.R. Budhe , U.S. Dixit. The effect of carbon-based additives and surface roughness of adherend surface on adhesive bond strength. International conference on Joining Material, Tiruchirapally, India, 2009.

Book Chapters

1. Book Title: Handbook of Fiber Reinforced Epoxy Composites

Springer UK

Chapter Title: Water sorption and Solvent sorption techniques of epoxy/synthetic/natural

Author: S. Budhe and M. D. Banea

2.  Book Title: Fatigue and fracture of adhesively bonded composite joints: Behaviour, simulation and modelling, Edited by: Anastasios Vassilopoulos

Chapter Title: Mode I fatigue behaviour and fracture of FRP composite joints

      Authors: J.Renart, J.Costa, C.Sarrado, S.Budhe, A.Turon, A.Rodríguez-Bellido 

https://www.researchgate.net/profile/S_Budhe

View

Teaching Experience

1) Assistant Professor (March 2020-Till),

    Mechanical Engineering Departement , NIT Calicut

2)    Assistant Professor, Department of Mechanical Engineering (Nov 2014-Sep 2015) 

Symbiosis Institute of Technology, Pune, Maharashtra, India

3) Assistant Professor, Department of Mechanical Engineering (Aug 2009-Dec 2010) 

Lovely Professional University, Jalandhar, Punjab, India

Research Experience

Central Federal Technological Institute, Rio de Janeiro, Brazil

Postdoctoral Research Fellow, Department of Mechanical and Material Engineering (Oct 2015-Jan 2020)

Research Interest: 

Adhesive bonded joints; Durability and Damage Tolerance; Natural and synthetic fiber composite material; Property  improvement of natural fiber composite material; Composite repair of metallic and non metallic component; Surface roughness of adherend bonded joints; Failure pressure analysis of metallic pipeline; Hydrogen Pressure Vessel; Sustainability