• Shafeeque Rahman,  Merin Joseph, Mithun Manog, Vinoy Thomas, Hanas T  and Lakshmi Vijayan, Glutamic acid modified gold nanorod sensor for the detection of calcium ions in neuronal cells. Chembiochem : a European journal of chemical biology. e202400009 (2024). 10.1002/cbic.202400009. 

• Merin Joseph, Muhammed Shafeeque Rahman PP, Vinoy Thomas, Hanas T, Ramapurath S Jayasree and Lakshmi Vijayan Nair, Porphyrin and Doxorubicin Mediated Nanoarchitectonics of Copper Clusters: A Bimodal Theranostics for Cancer Diagnosis and Treatment In Vitro, J. Mater. Chem. B, 2024, https://doi.org/10.1039/D3TB02618C

• Sharan Krishna, R.S., Muhammad Rabeeh, V.P., Rahim, S.A., M A Joseph and Hanas T . Effect of grain refinement on biomineralization and biodegradation of Mg–Ca alloy. Journal of Materials Research 38, 4772–4783 (2023). https://doi.org/10.1557/s43578-023-01192-6

• Shebeer A. Rahim, KS Surendra Mohan, VP Muhammad Rabeeh, M.A. Joseph, M. Mubarak Ali, T. Hanas, Hot rolled Mg-Ca/nHA composite for biodegradable implant material– A novel approach, Materials Today Communications, 2023, 35, 106235, https://doi.org/10.1016/j.mtcomm.2023. 106235.

• Rabeeh, V.M., Surendramohan, K. and Hanas, T, Bioactive Fe Foam for Degradable Bone Graft Cages, Advanced Engineering Materials 2023. Accepted Author Manuscript.  https://doi.org/10.1002/adem.202301416

• V. P. Muhammad Rabeeh, Shebeer A. Rahim, Sijina Kinattingara Parambath, G. K. Rajanikant, and T. Hanas, Iron–Gold Composites for Biodegradable Implants: In Vitro Investigation on Biodegradation and Biomineralization, ACS Biomaterials Science & Engineering, 2023, 9, 4255–4268 https://doi.org/10.1021/acsbiomaterials.3c00513

• Gaius Cherian Mathew, Shebeer A Rahim, Muhammad Rabeeh V P, M A Joseph and Hanas T, Tailoring Biodegradation of Mg-Ca Alloy by Acid Pickling and Polydioxanone/n-Hydroxyapatite Composite Coating for Temporary Implant Applications, J. of Materi Eng and Perform, 2023, 32, 2784–2792. 10.1007/s11665-022-06972-5

• KS Akshay, VP Muhammad Rabeeh, Shebeer A Rahim, KP Sijina, GK Rajanikant, Hanas T, Electrophoretic deposition of alginate/bioglass composite coating on Mg-Ca alloy for degradable metallic implant applications, Surface & Coatings Technology, 2022, 448, 128914

• M Joseph, MSR Pathiripparambath, Hanas T, RS Jayasree, LV Nair, Copper Nanocluster Enabled Simultaneous Photodynamic and Chemo Therapy for Effective Cancer Diagnosis and Treatment In Vitro, ChemMedChem, 2022, https://doi.org/10.1002/cmdc.202200201.

• PPMS Rahman, M Joseph, Hanas T, LV Nair, End to end aligned surface-modified gold nanorod for the detection of calcium, Materials Letters, 2022, 325,132906, https://doi.org/10.1016/j.matlet.2022.132906.

• Muhammad Rabeeh V.P. and Hanas T, Progress in manufacturing and processing of degradable Fe‑based implants: a review, Progress in Biomaterials, 2022, 11:163–191, 10.1007/s40204-022-00189-4.

• Muhammad Rabeeh VP and Hanas T, Enhancing biointerfacial properties of porous pure iron by gold sputtering for degradable implant applications, Materials Today Communications, 31, 2022, 103492, 10.1016/j.mtcomm.2022.103492.

• Shebeer A Rahim, M A Joseph, T S Sampath Kumar and Hanas T. Recent Progress in Surface Modification of Mg alloys for Biodegradable Orthopedic Applications, Frontiers in Materials, 2022 (9) 848980. https://doi.org/10.3389/fmats.2022.848980

• Shebeer A Rahim, Muhammad Rabeeh VP, Joseph M A, Hanas T. Does Acid Pickling of Mg-Ca Alloy Enhance Biomineralization?, Journal of Magnesium and Alloys, 2021 (9) 1028. 

• Shebeer A. Rahim, Nikhil T. T., M. A. Joseph and Hanas T. In Vitro Degradation and Mechanical Behaviour of Calcium Phosphate Coated Mg-Ca Alloy, Materials Technology, 2020. https://doi.org/10.1080/10667857.2020.1794278

• Shebeer A Rahim, M A Joseph and Hanas T, Tailoring biomineralization and biodegradation of Mg–Ca alloy by acetic acid pickling, Mater. Res. Express, 2020 (7) 054002.

• R, Shishir,  Shebeer and T. Hanas, Effect of grain refinement on biodegradation and biomineralization of low calcium containing Mg-Ca alloy, Materials Research Express, 2020 (7) 036501

• T.T. Dilshad., A. Shebeer, and T. Hanas, Polyvinyl Alcohol/Magnesium Phosphate Composite Coated Mg-Ca Alloy for Biodegradable Orthopaedic Implant Applications, Materials Research Express, 2019 (6) 1165b7.

• Hanas T, T S Sampath Kumar, Perumal G, Doble M and S Ramakrishna, Electrospun PCL/HA coated friction stir processed AZ31/HA composites for degradable metallic implant applications, Journal of Materials Processing Technology, 2018 (252) 398-406.

• Hanas T, T S Sampath Kumar, Perumal G and Doble M. Tailoring degradation of AZ31 alloy by surface pre-treatment and electrospun PCL fibrous coating. Materials Science and Engineering: C, 2016 (65) 43-50.

• Gibin George, R. Krishna Sabareesh, Shijo Thomas, V. Sajith, T. Hanas, Sumitesh Das, and C. B. Sobhan Experimental Investigation of Material Surface Erosion Caused by TiO₂ Nanofluid Impingement J. Nanofluids 3, 97-107 (2014).

Book Chapters

• V.P. Muhammad Rabeeh , K.S. Akshay, K.S. Surendramohan , T.S. Sampath Kumar and T. Hanas, Biocompatible Coatings on Biodegradable Magnesium Alloys,Advances in Corrosion Control of Magnesium and Its Alloys: Metal-Matrix Composites and Protective Coatings, Edited by Viswanathan S. Saji, CRC Press, https://doi.org/10.1201/9781003319856

• Shebeer A. Rahim, V.P. Muhammad Rabeeh, Sharath Babu, M.A. Joseph and T. Hanas, Advancements in Magnesium Metal-Matrix Composites for Degradable Implant Applications, Advances in Corrosion Control of Magnesium and Its Alloys: Metal-Matrix Composites and Protective Coatings, Edited by Viswanathan S. Saji, CRC Press, https://doi.org/10.1201/9781003319856 

• Shebeer A. Rahim, V. P. Muhammad Rabeeh, M. A. Joseph and T. Hanas. "Biodegradable Metallic Implants: Challenges and Opportunities." What is Biodegradation and Why it Matters, edited by Robert T. Howard,  Nova Science Publishers,  2022, pp 1-72.

• Mohammed Shafeeque Rahman P.P., Merin Joseph, Lakshmi V Nair and Hanas T. "Emerging Materials for Biosensor Applications in Healthcare." in Emerging Materials, edited by Thoutam L.R., Tayal S. and Ajayan J. Springer, Singapore, 2022, pp 213-263

Conference Papers

• T Favas, SA Rahim, VPM Rabeeh, MA Joseph, Hanas T, Effect of Ca content on biomineralization of Mg-Ca alloys, IOP Conference Series: Materials Science and Engineering 1248 (1), 012108, 2022.

• R. Shishir, A. Shebeer, and T. Hanas, Studies on Effect of Cryogenic Treatment on Bio-corrosion of Low Calcium Containing Mg-Ca Alloy, Materials Today Proceedings, 2020 (22) 2877-2882.

• T.T. Dilshad., A. Shebeer, and T. Hanas, Tailoring Biodegradation of Mg-Ca Alloys By Hydro-Thermal Treatment, Materials Today Proceedings, 2020 (22) 2118-2123.

• T. Nikhil, A. Shebeer, M. Joseph and T. Hanas, In vitro Biodegradation and Biomineralization of Mg-Ca Alloys, Materials Today Proceedings, 2020 (22) 2870-2876.

• T Hanas and T S Sampath Kumar, Tailoring biodegradation of fine grained AZ31 Alloy implants by nanofibrous coatings, Materials Today Proceedings, 2017 (4) 6697–6703.

• Hanas T and T S Sampth Kumar, Tailoring the bioactivity of AZ31 alloy by nanofibrous PCL/HA composite coatings for degradable metallic implant applications, European Cells and Materials, eCM Meeting Abstracts 2015, Collection 6; Biometal. page 16

• G. Keerthi Soujanya, T. Hanas, V. Yogeshwar Chakrapani, B. Ratna Sunil, T. S. Sampath Kumar, Electrospun nanofibrous polymer coated magnesium alloy for biodegradable implant applications, Procedia Materials Science, 2014 (5) 817 – 823.

• Hanas T and G Unnikrishnan, Mechanical Properties of Nano-Silica Reinforced Acrylonitrile Butadiene Rubber, Proceedings of International Conference on Functional Polymers 2011, Jan 28-30,176-184, NIT Calicut. Kerala.

• Naveen KV, Hanas T and Unnikrishnan G, Development and Characterization of NBR/ Silica Nanocomposites, Proceedings of International Conference on Functional Polymers 2011, Jan 28-30, 240-246, NIT Calicut. Kerala.

• Naveen KV, Hanas T and Unnikrishnan G, Study on Development and Characterization of Nitrile Butadiene Rubber/Silica Nanocomposites, Proc. of the 5th International Conference on Advances in Mechanical Engineering , June 06-08, 2011 S.V. NIT, Surat, Gujarat.

• Gibin G, Krishna SR, Sumitesh D, Hanas T, Shijo T and Sobhan CB, Erosion phenomena of Nanofluids on Ductile and Brittle Materials, Abstract book of 3rd International conference on frontiers in Nanoscience and Technology, Cochin nano-2011, Aug 14 – 17.

• V. Upender Rao, V. Sajith, T. Hanas and C. B. Sobhan, Experimental investigations on the performance of Heat exchangers with nanofluids, ASME Intepack, July 8-12, 2007, Vancouver, BC, Canada.

Conferences Attended and Papers Presented

• Development of copper oxide quantum dots modified mesoporous gamma alumina ultrafiltration membrane; Polepaka Pranitha, Mohammed Rashad, T Hanas; World Nano Congress on Advanced Science and Technology (WNCAST) - 2021, VIT Vellore.

• Tailoring biodegradation of Mg-Ca Alloy by Biomimetic Calcium Phosphate Coating for Temporary Implant Applications Nikhil T.T, Shebeer A.R, M.A Joseph, Hanas T, 26^th International Symposium of Metastable, Amorphous and Nanostructured Materials (ISMANAM 2019), IIT Madras, Chennai, India.

• Tailoring Biodegradation of Mg-Ca Alloys By Hydro-Thermal Treatment, Materials, T. Dilshad., A. Shebeer, and T. Hanas, International Conference on Materials, Manufacturing and Modelling (ICMMM) 2019 Vellore Institute of Technology (VIT), Vellore, India

• In vitro Biodegradation and Biomineralization of Mg-Ca Alloys, T. Nikhil, A. Shebeer, M. Joseph and T. Hanas, International Conference on Materials, Manufacturing and Modelling (ICMMM) 2019 Vellore Institute of Technology (VIT), Vellore, India

• Studies on Effect of Cryogenic Treatment on Bio-corrosion of Low Calcium Containing Mg-Ca Alloy, R. Shishir, A. Shebeer, and T. Hanas, International Conference on Materials, Manufacturing and Modelling (ICMMM) 2019 Vellore Institute of Technology (VIT), Vellore, India

• Controlled biodegradation with enhanced biomineralization of fine grained magnesium alloys, T Hanas and T S Sampath Kumar, National Symposium on Light Metals, Composites and Manufacturing Processes (LMCMP) -2017, CSIR National Institute for Interdisciplinary Science and Technology (NIIST), Thiruvananthapuram.

• Tailoring  Biodegradation of Fine Grained AZ31 Alloy Implants by Nanofibrous Coatings , T Hanas and T S Sampath Kumar, International Conference and Expo on Magnesium – 2016, VIT Chennai.

• PCL/HA composite coated AZ31 alloy for degradable metallic implant applications T. Hanas, T.S. Sampath Kumar, Govindaraj Perumal and Mukesh Doble, In House Symposium  2016, Dept of MME, IIT Madras

• Tailoring the bioactivity of AZ31 alloy by nanofibrous PCL/HA composite coatings for degradable metallic implant applications. T Hanas and TS Sampath Kumar, 7^th Symposium on Biodegradable Metals for biomedical applications, 2015, Carovigno, Italy.

• In vitro degradation and biomineralization study of nanofibrous coated groove presses metallic implants. T Hanas and T S Sampath Kumar, Indo-Australian Conference on Biomaterials, Tissue Engineering, Drug Delivery system and Regenerative medicine- 2015, Anna University, Chennai.

• Electrospun nanofibrous polymer coated magnesium alloy for biodegradable implant applications. G. Keerthi Soujanya, T. Hanas, V. Yogeshwar Chakrapani,B. Ratna Sunil and T. S. Sampath kumar.  International Conference on Advances in Manufacturing and Materials Engineering, (ICAMME)- 2014, NIT Surathkal, Karnataka.

• Properties of Nano-Silica Reinforced Acrylonitrile Butadiene Rubber, Hanas T and G Unnikrishnan, International Conference on Functional Polymers 2011, NIT Calicut. Kerala

• Development and Characterization of NBR/ Silica Nanocomposites, Naveen KV, Hanas T and Unnikrishnan G, International Conference on Functional Polymers 2011, NIT Calicut. Kerala

• Experimental investigations on the performance of Heat exchangers with nanofluids, V. Upender Rao, V. Sajith, T. Hanas and C. B. Sobhan, ASME Interpack, July 8-12, 2007, Vancouver, BC, Canada

• Gibin G, Hanas T, Krishna Sabareesh, Sumitesh Das, Shijo Thomas, Sajith V. and C B Sobhan, A system for determining material surface erosion caused by impingement of nanofluids on pipes carrying nanofluids. Indian Patent File no: 181/KOL/2011 dated 11.2.2011(TATA Steel & NIT Calicut)

• Gobinath, Sajith V., Krishna Sabareesh, Sumitesh Das, Shijo Thomas, Hanas T. and C B Sobhan,A process for determining lubricant composition in a vapour compression refrigeration system to enhance the coefficient of performance. Pub. No.: WO/2012/156980; 22.11.2012 (TATA Steel & NIT Calicut)

Ongoing

Institute Level

• Associate Dean (Academic)

• Faculty-In-Charge, Central XRD

Department Level

• Faculty Advisor - B.Tech Materials Science 2019 Admission

• Lab - In - Charge, Applied Materials Research Laboratory, SMSE

Completed

• Lab - In - Charge, Materials Processing Laboratory, SMSE (July 2021-Jan 2023)

• Lab - In - Charge, PG Laboratory, SMSE (Nov 2017 - Jan 2023)

• Faculty - in - Charge, NITC Swimming Pool (2021 Dec - 2022 Aug)

• Warden, NITC Hostels (2021 Aug- 2021 Dec)

• Member, TEQIP III Purhcase Committee

• Coordinator (Training), Centre for Training and Placement (2018 July - 2020 Dec)

• Staff Editor, TechNanos, SNST

• Faculty Advisor, SNST Association

• Member, Library Advisory Committee, SNST Nominee

• Secretary, DCC- SNST

• Program Co-ordinator, M.Tech Nanotechnology, SNST

• Faculty - In - Charge of Institute Vehicles (Sep 2016-Nov 2018)

• Faculty Advisor, In House Symposium 2017, SNST

• Centre Manager, Scanning Electron Microscopy Centre, NIT Calicut, 2008-2013

• Warden, Mens Hostels, 2006 – 2009.

• Lab - In - Charge, Heat Treatment Lab, MED, 2009

• Associate Editor, NITC Research Review – 2009

• Coordinator, FDP on Trends and Techniques in Nanotechnology- 2010.

• Faculty – In – Charge, Club Unwired, Student Club, NITC: till July 2013.

PhD Completed

PhD Students & Research Area (Ongoing)

Muhammad Rabeeh VP : Fe based Degradable Metallic Implants

Muhammed Shafeeque Rahman PP: Neromodulation using Nanoparticles

Merin Joseph: Metal Nanoclusters for Cancer Diagnosis and Therapy

Laiju Lukose:Magnesium based Light Weight Structural Alloys

Nithin S N: Green Electrospinning

Saranya George: Materials for Dental Applications

PG Project Students

Ongoing

Sharan Krishna R S (M.Tech: Materials Science and Technology, 2021-23)

Completed (2022)

Favas T (M.Tech: Materials Science and Technology, 2020-22)

Completed (2021)

Gaius Cherian (M.Tech: Materials Science and Technology, 2019-21)

Jyothis S (M.Tech: Materials Science and Technology, 2019-21)

Pranitha Polepaka (M.Tech: Nanotechnology, 2019-21)

Completed (2020)

Akshay KS (M.Tech: Nanotechnology 2018-20)

Kiran P B (M.Tech: Materials Science and Technology, 2018-20)

Surendra Mohan KS  (M.Tech: Materials Science and Technology, 2018-20)

Completed (2019)

Dilshad T. T (M.Tech: Nanotechnology, 2017-19)

Nikhil TT (M.Tech: Materials Science and Technology, 2017-19)

Shishir R (M.Tech: Nanotechnology, 2017-19)

UG Project Students

Ongoing

Aadil Shan (B.Tech Materials Science and Engg, 2022-2023)

Dhanyasakthie G (B.Tech Materials Science and Engg, 2022-2023)

Gokul Bhaskaran (B.Tech Materials Science and Engg, 2022-2023)

Completed (2020)

Rhea Francis  (B.Tech: Mechanical Engg, 2019-2020)

Sabit Abdul Khader (B.Tech: Mechanical Engg, 2019-2020)

Sarath Philip Mathew(B.Tech: Mechanical Engg, 2019-2020)

Subinraj T Sunil (B.Tech: Mechanical Engg, 2019-2020)

Completed (2019)

Mohamed Musthafa (B.Tech: Mechanical Engg, 2018-2019)

Muhammed Ajmal (B.Tech: Mechanical Engg, 2018-2019)

Muhammed Danish V P (B.Tech: Mechanical Engg, 2018-2019)

Navya Jaideep (B.Tech: Mechanical Engg, 2018-2019)

Pranoy Arun (B.Tech: Mechanical Engg, 2018-2019)

Sucheth Jayan (B.Tech: Mechanical Engg, 2018-2019)

Project Staff

Nithin Sivadas, Research Assistant, ICMR Project. (2019-2021)

Surendra mohan.K.S, Research Assistant, ICMR Project (ongoing)

• Coordinator, ATAL sponsored Faculty Development Programme (FDP) on Functional Materials for Energy, Environment and Health Care, June 2021.

• Coordinator, Faculty Development Programme (FDP) on Trends and Techniques in Nanotechnology NIT Calicut, July 2010.

• Faculty-In-Charge, In House Symposium, School of Nano Science and Technology, Nov, 2017.

• Won Sudharshan Bhatt Memorial award for best Ph.D thesis in Metallurgical and Materials Engineering from IIT Madras in 2018.

• Won Best Paper Award among the publications by PhD students of Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras in 2016.

• Won Best Paper Award in First International Conference and Expo on Magnesium – 2016, iMagCon 2016.

Undergraduate Courses

• Materials Science and Metallurgy

• Structure of Materials

• Ceramics and Glasses

• Composite Materials

• Engineering Graphics

Postgraduate Courses

• Structure of Nanomaterials

• Ceramic Science and Technology

• Elements of X-Ray Diffraction

• Elements of X-Ray Diffraction

PG Projects Guided

• Development and Characterization of  NBR/Silica Nanocomposites (2009-2010).

• Studies on Acrylonitrile Butadiene Rubber Reinforced with Chitosan (2009-2010).

• Study of Erosion Effect of Nanofluid on Ductile and Brittle Materials (2010-2011).

• Preparation and Characterization of NBR/Nano Silica Nanocomposites (2010-2011).

• Studies on Development and Characterization of Epoxy/CNT Nanocomposites (2011-2012).

• Studies on Effect of grain Refinement on Biocorrosion of Mg-Ca Alloys (2018-2019).

• Tailoring Biodegradation of Mg-Ca Alloys by Hydro-Thermal Pre-treatment and Nanostructured Amorphous Magnesium Phosphate coating (2018-2019).

• Development and Characterization of Biomimetic Calcium Phosphate Coated Mg-Ca alloy for Degradable Metallic Implant Applications (2018-2019). 

• Electrophoretic Deposition of Alginate/Bioglass composite on Mg alloy for Controlled Biodegradation (2019-2020).

• Development and Characterization of Fe based Biodegradable Metallic Implants for Temporary Applications (2019-2020).

• Tailoring Biodegradation of Mg-Ca Alloy by PVA/Magnesium Phosphate-Bioglass Hybrid Composite Coating for Temporary Implant Applications (2019-2020).

• Polydioxanone/nHA coated Mg-Ca alloy for biodegradable implant application (2020-2021).

• Iron-Hydroxyapatite Nanocomposite for Biodegradable Implant Applications (2020-2021).

• Antibacterial Development of CuO QD modified mesoporous  γ- Alumina antibacterial surface for membrane applications (2020-2021).

• Effect of Calcium content on biomineralization of Mg-Ca alloys (2021-22)

• Equal Channel Angular Pressing of Mg-Ca alloys for biodegradable implant applications (2022-23)

• Developmentof Heat Cured PMMA Reingorced with Titanium dioxide and Chitosan- A comparative study [MDS Student Project as Mentor] 

UG Projects Guided

• Electrospun nanofibrous coated Mg-Ca alloys for degradable implant applications.

• Energy harvesting through subcutaneous perovskite solar cells and the effect of melanin on power conversion efficiency (2019-2020). 

• Development and Characterization of Volatile Hydrocarbon Vapour Adsorbing Nasal Filter for Health Care Applications (2018-2019).

• A Study on Materials for Biomedical Applications (2012-2013).

• Biodegradable Materials

• Biodegradable Metallic Implants

• Severe Plastic Deformation

• Electrospinning

• Nanocomposites

• Surface Modifications and Coating Techniques

• Medical Materials

• Affrodable Healthcare

• Development and Characterization of Biodegradable Magnesium Based Alloys for Degradable Metallic Implants, Indian Council for Medical Research (ICMR) - as Principal Investigator 

• Development and Characterization of Rubber based Nanocomposites, Faculty Research program - NIT Calicut –  as Principal Investigator.

• Development of Nanofluids for Cooling Applications in Steel Industry, TATA Steel – as Co Investigator

• Experimental Investigation of Convective Heat Transfer in Water Based Nanofluids, BRNS – as Co Investigator

• Investigations on the Application of Catalytic Nanoparticles as Diesel and Bio Diesel Additives, Hindustan Petroleum Corporation Limited (HPCL) - as Co-Investigator

• Shaping The Career, Walk with Scholar, October 2019

• Guest Lecture on Career Planning, GKM College of Engineering, Chennai, July 2019

• Design of a Research Project, PROFCON, March 2019.

• ​Becoming a Successful Researcher, Walk with Scholar, March 2019.

• Career Planning - Right decisions in Right Time, Walk with Scholar, Feb 2019.

• Research - Beyond Methodologies, SNST, NITC, Jan 2019.

• Becoming a Successful Researcher, Wisdom global Mission, Calicut Jan 2019

• Preparing for Engineering Studies – Expert Member for Discussion –Telecasted in the program ‘Vazhikati’ by Peace Radio on 28^th July 2016.

• Nanomaterials’ -  Micro/Nano Scale Phenomena, NIT Calicut,  July, 2008.

• ‘Introduction to Nanomaterials’ - Trends and Techniques in Nanotechnology NIT Calicut, July 2010.

• ‘Nanomaterials and Nanostructured Materials’ - Advanced Nanomaterials Process, Characterization and Applications, NIT Calicut July 2011.

• ‘Nanostructured Biodegradable Materials for Temporary Implant Applications’ – Faculty Development Program on NANOTECHNOLOGY – Basics and Applications, SNST, NIT Calicut, July 2016.

• ‘Nanotechnology for Affordable Health Care’ - Faculty Development Program on Recent Advances in Nanotechnology, GEC Idukki, Kerala, Dec 2017.

• 'Nanotechnology for Health Care' - ICMR sponsored two days national level workshop on Nanotechnology and Nanomaterials: Future Medicine in Treatment of Life Threatening Diseases, Mechanical Engineering Department, Govt. College of Engg., Tirunelveli, Jan 2018.

• 'Nanotechnology for Health Care' - Faculty Development Program on Smart Nanomaterials - Fundamentals to Applications, SMSE, NIT Calicut, March 2019

• 'Nanotechnology for Healthcare:Medical Materials' - Faculty and Staff Development Program on Nano Technology to Nano Tribology, GEC Kozhikode, Jan 2020

• 'Nanomaterials for Health Care' - Faculty and Staff Development Program on Hybrid Materials and Applications, GEC Kozhikode, Jan 2020

• 'Nanotechnology and Medical Materials' - Faculty Development Program, Vignan's Foundation for Science, Technology and Research, Guntur, July 2020

• ‘Material for Degradable Metallic Implants’- Faculty Development Program, Ahalia School of Engineering and Technology, May 2021.

• ‘Degradable Metallic Implants’ - Faculty Development Program, GMR Institute of Technology, Kakinada, June 2021.

• ‘Biodegradable Metallic Implants’- ATAL Faculty Development Program, SMSE, NIT Calicut, June 2021.

• ‘In-vitro Testing Of Biodegradable Metals For Temporary Implant Applications’ Faculty Development Programme on Material Testing and Characterization- Destructive and Non-destructive approaches, Department of Civil Engineering, Government Engineering College Kozhikode, July 2021.

• “Biodegradable Metallic Implants” - Advanced Entrepreneurship and Skill Development Program on Advanced Materials for Affordable Healthcare , SMSE, NIT Calicut, Feb 2023.

Click here for detailed CV : https://bit.ly/3yDTrs5

View