DEPARTMENTS
Dr. Sandip Rudha Budhe
Dr. Sandip Rudha Budhe

Assistant Professor

Office Address:

Contact no:

Email ID:

sandip@nitc.ac.in

Home Address:

A-11, Apartment A Faculty Quarters, NIT Calicut 673601, Kerala India

  • Ph.D., Strength analysis of composite bonded joints for aerospace structure, University of Girona, Spain, 2014

  • M.Tech., Machine Design, Indian Institute Of Technology, Guwahati, India, 2009

  • B.E. Mechanical Engineering, Nagpur University, Maharashtra, India, 2005

  • Educational Qualifications

    • Ph.D., Strength analysis of composite bonded joints for aerospace structure, University of Girona, Spain, 2014

    • M.Tech., Machine Design, Indian Institute Of Technology, Guwahati, India, 2009

    • B.E. Mechanical Engineering, Nagpur University, Maharashtra, India, 2005

    Journals

    International Journal Papers

    1) S. Budhe, M.D. Banea, S. de Barros, Prediction of the burst pressure for defective pipelines using different semi-empirical model. Frattura ed Integrita Strutturale. 2020; 14(52):137-147. https://doi.org/10.3221/IGF-ESIS.52.12.

    2) S. Budhe, M.D. Banea, S. de Barros, Prediction of Failure Pressure for Defective Pipelines Reinforced with Composite System, Accounting for Pipe Extremities. Journal of Failure Analysis and Prevention (2019). https://doi.org/10.1007/s11668-019-00782-z.

    3) Zugliani P. A, Banea M.D, Budhe S, Carbas R.J, da Silva L.F.M, Rohem N.R.F, de Barros S, “Bonded composite repair of metallic pipeline using energy release rate method”, Journal of Adhesion Science and Technology, 2019, DOI: 10.1080/01694243.2019.1632537.

    4) Budhe, S., de Barros, S., Banea, M.D. “Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites” Journal of Brazilian Society of Mechanical Science of Engineering, Vol-41(263), pp:110,  2019.

    5) S. Budhe, M. D. Banea, N. R. F. Rohem, S. de Barros,  Assessment of failure pressure of a GFRP composite repair system for wall loss defect in metallic pipelines, Material Science and Engineering Technology Journal. Vol-49, pp:110, 2018. 

    6) Jordi Renart, S. Budhe, L. Carreras, J.A. Mayugo, J. Costa,  A new testing device to simultaneously measure the mode I fatigue delamination behavior of a batch of specimens, International journal of fatigue, vol 116, pp:275-283, 2018. 

    7) Marcio M Arouche, S. Budhe, M.D. Banea, Sofia T. de Freitas, Silvio de Barros, Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests, Part L Journal of Materials: Design and Applications. 2018.

    8) Silvio de Barros, S. Budhe, M.D. Banea, Ney R.F. Rohem, E.M. Sampaio, Valber A. Perrut, Luiz D.M. Lana, An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe. Frattura ed Integrita Strutturale. Vol. 44, pp:151-160, 2018. 

    9) Marcio A. Arouche, S. Budhe, M.D. Banea, Sofia de Freitas, Silvio de Barros, Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests, Journal of the Brazilian Society of Mechanical Sciences and Engineering vol. 40(1), 2018. 

    10) S. Budhe, M.D. Banea, N.R.F. Rohem, E.M. Sampaio, S. de Barros, Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines, Composite structure, vol 176, pp:1013-1019, 2017. 

    11) M dos Reis, M. D. Banea, S. Budhe, Silvio de Barros, “Effect of adherend surface preparation on the mechanical properties of aluminium bonded joints”, Annal of Dunarea de Jos University of Galati, 28:39, 2017.

    12) S. Teixeira de Freitas, M.D. Banea, S. Budhe, S. de Barros, Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests, Composite structure, vol 164, pp 68-75, 2017. 

    13) S. Budhe, M.D. Banea, S. de Barros, L.F.M. da Silva, An updated review of adhesively bonded joints in composite materials, International Journal of Adhesion and Adhesives, vol -72, pp: 30-42, 2017.

    14) S. De Barros, M. D. Banea, S. Budhe, C. E. R. De Siqueira, B. S. P Lobão & L.F.G. Souza, Experimental analysis of metal-composite repair of floating offshore units (FPSO), The Journal of Adhesion Vol. 93,(1-2), pp:147-158, 2017.

    15) S. De Barros, P.P. Kenedi, S.M. Ferreira, S. Budhe, A.J. Bernardino & L.F.G.souza, Influence of Mechanical Surface Treatment on Fatigue Life of Bonded Joints, Journal of Adhesion, vol-93 (8),pp: 599-612, 2017.

    16) A. Ghumatkar, S. Budhe,  R. Sekhar, M.D. Banea b  S. de Barros Influence of Adherend Surface Roughness on the Adhesive Bond Strength, Latin American Journal of Solids and Structures vol. 16(13), pp:1-15, 2016.

    17) N.R.F.Rohem, L.J.Pacheco, S. Budhe, M.D.Banea. E.M.Sampaio.S.de Barros,  Development and qualification of a new polymeric matrix laminated composite for pipe repair, composite structure, vol 152, pp: 737-745, 2016.

    18) J. Renart, P. Vicens, S. Budhe, J. Costa, J.A. Mayugo, A.Rodriguez-Bellido, An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen’s compliance. International journal of fatigue, vol 82 (3), pp:634-642, 2016.

    19) S. Budhe, A. Ghumatkar, N. Birajdar and M. D. Banea, Effect of surface roughness using different adherend materials on the adhesive bond strength, Applied adhesion science, vol-3(20), pp:1-10, 2015.

    20) S. Budhe, A. Rodriguez-Bellido, J. Renart, J. A. May

    Teaching Experience

    1) Symbiosis Institute of Technology, Pune, Maharashtra, India

       Assistant Professor, Department of Mechanical Engineering (Nov 2014-Sep 2015) 

    2) Lovely Professional University, Jalandhar, Punjab, India

    Assistant Professor, Department of Mechanical Engineering (Aug 2009-Dec 2010) 

     

    Research Experience

    Central Federal Technological Institute, Rio de Janeiro, Brazil

    Postdoctoral Research Fellow, Department of Mechanical and Material Engineering (Oct 2015-Jan 2020)

    Research Interest: 

    Adhesive bonded joints; Durability and Damage Tolerance; Natural and synthetic fiber composite material; Property  improvement of natural fiber composite material; Composite repair of metallic and non metallic component; Surface roughness of adherend bonded joints; Failure pressure analysis of metallic pipeline

    20. S. Budhe, M.D. Banea, S. de Barros, Prediction of the burst pressure for defective pipelines using different semi-empirical models, Frattura ed Integrita Strutturale. 2020.  https://doi.org/10.3221/IGF-ESIS.52.12   

    19. S. Budhe, M.D. Banea, S. de Barros, Composite repair system for corroded pipelines: an overview of recent developments and modelling. Journal of Marine Science and Technology (2019) https://doi.org/10.1007/s00773-019-00696-3

    18. S. Budhe, M.D. Banea, S. de Barros, Prediction of Failure Pressure for Defective Pipelines Reinforced with Composite System, Accounting for Pipe Extremities. Journal of Failure Analysis and Prevention (2019). https://doi.org/10.1007/s11668-019-00782-z

    17. Zugliani P. A, Banea M.D, Budhe S, Carbas R.J, da Silva L.F.M, Rohem N.R.F, de Barros S, “Bonded composite repair of metallic pipeline using energy release rate method”, Journal of Adhesion Science and Technology,2019.https://doi.org/10.1080/01694243.2019.1632537

    16. Budhe, S., de Barros, S., Banea, M.D. “Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites” Journal of Brazilian Society of Mechanical Science of Engineering, Vol-41(263), pp:110,  2019.

    15. S. Budhe, M. D. Banea, N. R. F. Rohem, S. de Barros,  Assessment of failure pressure of a GFRP composite repair system for wall loss defect in metallic pipelines, Material Science and Engineering Technology Journal. Vol-49, pp:110, 2018. 

    14. Jordi Renart, S. Budhe, L. Carreras, J.A. Mayugo, J. Costa,  A new testing device to simultaneously measure the mode I fatigue delamination behavior of a batch of specimens, International journal of fatigue, vol 116, pp:275-283, 2018. 

    13. Marcio M Arouche, S. Budhe, M.D. Banea, Sofia T. de Freitas, Silvio de Barros, Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests, Part L Journal of Materials: Design and Applications. 2018

    12. Silvio de Barros, S. Budhe, M.D. Banea, Ney R.F. Rohem, E.M. Sampaio, Valber A. Perrut, Luiz D.M. Lana, An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe. Frattura ed Integrita Strutturale. Vol. 44, pp:151-160, 2018. 

    11. Marcio A. Arouche, S. Budhe, M.D. Banea, Sofia de Freitas, Silvio de Barros, Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests, Journal of the Brazilian Society of Mechanical Sciences and Engineering vol. 40(1), 2018. 

    10. S. Budhe, M.D. Banea, N.R.F. Rohem, E.M. Sampaio, S. de Barros, Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines, Composite structure, vol 176, pp:1013-1019, 2017. 

    09. S. Teixeira de Freitas, M.D. Banea, S. Budhe, S. de Barros, Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests, Composite structure, vol 164, pp 68-75, 2017. 

    08. S. Budhe, M.D. Banea, S. de Barros, L.F.M. da Silva, An updated review of adhesively bonded joints in composite materials, International Journal of Adhesion and Adhesives, vol -72, pp: 30-42, 2017.

    07. S. De Barros, M. D. Banea, S. Budhe, C. E. R. De Siqueira, B. S. P Lobão & L.F.G. Souza, Experimental analysis of metal-composite repair of floating offshore units (FPSO), The Journal of Adhesion Vol. 93,(1-2), pp:147-158, 2017.

    06. S. De Barros, P.P. Kenedi, S.M. Ferreira, S. Budhe, A.J. Bernardino & L.F.G.souza, Influence of Mechanical Surface Treatment on Fatigue Life of Bonded Joints, Journal of Adhesion, vol-93 (8),pp: 599-612, 2017.

    05.  A. Ghumatkar, S. Budhe,  R. Sekhar, M.D. Banea b  S. de Barros Influence of Adherend Surface Roughness on the Adhesive Bond Strength, Latin American Journal of Solids and Structures vol. 16(13), pp:1-15, 2016.

    04.  N.R.F.Rohem, L.J.Pacheco, S. Budhe, M.D.Banea. E.M.Sampaio.S.de Barros,  Development and qualification of a new polymeric matrix laminated composite for pipe repair, composite structure, vol 152, pp: 737-745, 2016.

    03. J. Renart, P. Vicens, S. Budhe, J. Costa, J.A. Mayugo, A.Rodriguez-Bellido, An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen’s compliance. International journal of fatigue, vol 82 (3), pp:634-642, 2016.

    02. S. Budhe, A. Ghumatkar, N. Birajdar and M. D. Banea, Effect of surface roughness using different adherend materials on the adhesive bond strength, Applied adhesion science, vol-3(20), pp:1-10, 2015.

    01. S. Budhe, A. Rodriguez-Bellido, J. Renart, J. A. Mayugo, J. Costa, Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs. International Journal of Adhesion and Adhesives, vol(49), pp:80-89, 2014.

    Book Chapter

    Book Title: Fatigue and fracture of adhesively bonded composite joints: Behaviour, simulation and modelling, Edited by: Anastasios Vassilopoulos

    Chapter Title: Mode I fatigue behaviour and fracture of FRP composite joints;   Authors: J.Renart, J.Costa, C.Sarrado, S.Budhe, A.Turon, A.Rodríguez-Bellido

    Conference Papers:

    18. Mariana Doina Banea, Sandip Budhe, Silvio de Barros, “Predicting the elastic modulus of natural fiber hybrid composite using classical lamination theory”, European Latin American Conference of Theoretical and Applied Mechanics, Havana, Cuba, 2019.

    17. P. A. Zugliani, S. Budhe,M. D. Banea, R.J.C Carbas, LFM da Silva, S. de Barros,  “Prediction of failure pressure in bonded composite repaired pipes using the energy release rate method”, 4th International Conference on Structural Adhesive Bonding, Porto, Portugal, 2017.

    16. M.M. Arouche, S. Budhe, S.T. de Freitas, M.D. Banea, S. de Barros, “Interface adhesion performance of composite-to-composite bonded joints under salt water condition” 4th International Conference on Structural Adhesive Bonding, Porto, Portugal, 2017.

    15.Pedro A. Zugliani, S. Budhe,M. D. Banea,  S. de Barros, Failure pressure analysis of composite repair of metallic pipe with wall loss defect, 6th International Symposium on Solid Mechanics – MecSol, Joinville, Brazil, 2017.

    14 Lais A. Alves, Márcio M. Arouche, S. Budhe, Sofia Teixeira de Freitas, M.D. Banea, Silvio de Barros, “Adhesion performance of composite-to-metal bonded joints under salt spray and salt water condition” 3rd EMI International conference, Rio de Janeiro, Brazil 2017.

    13 S. Teixeira de Freitas, M.D. Banea, S. Budhe, S. de Barros,  “Interface adhesion quality between steel-CFRP bonding”, 19thInternational Conference on Composite Structures, Portugal, Porto, 2016.

    12.A.Ghumatkar, S. Budhe,  R. Sekhar, “Experimental study on different adherend surface roughness on the adhesive bond strength”, International Conference on Advancements in Materials for Manufacturing, Hyderabad, India, 2016.

    11. S. de Barros, Sofia Teixeira de Freitas, Mariana D. Banea, S. Budhe, Márcio M. Arouche, Bruno L. dos Santos, “Adhesion quality of steel-CFRP interface bonding”, BCCM-3 – Brazilian Conference on Composite Materials, Gramado, 2016.

    10 S. Budhe, N. Birajdar, M. D. Banea, “Experimental study on effect of surface roughness of adherend on the adhesive bond strength”, CLBA Conference, Rio de Janeiro, January 2016.

    09. C. E. R. De Siqueira, B. S. P Lobão,  F. Marques, L.F.G. Souza, S. Budhe, M. D. Banea, S. De Barros, “Fatigue-Three point bending test for composite repair structures” CLBA Conference, Rio de Janeiro, Brazil, 2016.

    08. C. E. R. De Siqueira, D. J. Schmdit,  B. S. P Lobão,  S. Budhe, L.F.G. Souza, S. De Barros,  “Experimental analysis of composite-metal joints, Meeting on Aeronautical Composite Materials and Structures” Meeting on Aeronautical Composite Materials and Structures – MACMS, Sao Paulo, Brazil, 2015

    07. A. Ghumatkar, S. Budhe,  R. Sekhar, “Effect of heat treatment and surface roughness of adherend material on adhesive bond strength” Global Conference on Flexible Systems Management, GLO GIFT, Pune, India, 2015.

    06. J. Renart, S. Budhe, Josep. Costa, A. Rodríguez-Bellido, “A multiple specimen methodology for crack growth under fatigue loading of doublécantileve beam specimens” 16th European Conference on Composite Materials, Seville, Spain, 2014.

    05. A. Rodríguez-Bellido, S. Budhe, J. Renart, J. Costa, “On the effect of pre-bond moisture in the adherents fracture toughness of bonded joints for composite repairs” 16th European Conference on Composite Materials, Seville, Spain, 2014.

    04. S. Budhe, A. Rodríguez-Bellido, J. Renart, J. Costa, “The effect of pre-bond moisture and temperature on the fracture toughness of bonded joints for composite repairs”6th International conference on composites testing and model Identification, Aalborg, Denmark, 2013.

     

    03. Ana Rodríguez-Bellido, S. Budhe, JordiRenart, Josep Costa, “Study of adherent conditioning on the fracture toughness of bonded joints for composite repairs”  15th European Conference on Composite Materials, Venice, Italy, 2012.

    02. Ana Rodríguez-Bellido, S.  Budhe, JordiRenart, Josep Costa, “Study of the influence of the pre-bond moisture content of the adherents on the fracture toughness of bonded joints for composite repairs” SAMPE International Symposium and Exhibition- Emerging Opportunities: Materials and Process Solutions; Baltimore, MD; United States, 2012.

    01. K. Acharyya, Arun Chattopadhyay , S.R. Budhe , U.S. Dixit “The effect of carbon-based additives and surface roughness of adherend surface on adhesive bond strength” International conference on Joining Material, Tiruchirapally, India, 2009.