1. Saha, S., Kumar, A.S., Malayath, G., Deb, S., Bandyopadhyay, P.P., 2023. Energy balance model to predict the critical edge radius for adhesion formation with tool wear during micro-milling. Journal of Manufacturing Processes 93, 219–238. https://doi.org/10.1016/j.jmapro.2023.03.034

2. Kumar, A.S., Deb, S., Paul, S., 2022. Burr removal from high-aspect-ratio micro-pillars using ultrasonic-assisted abrasive micro-deburring. J. Micromech. Microeng. 32, 055010. https://doi.org/10.1088/1361-6439/ac6562

3. Kumar, A.S., Deb, S., Paul, S., 2021. Ultrasonic-assisted abrasive micro-deburring of micromachined metallic alloys. Journal of Manufacturing Processes 66, 595–607. https://doi.org/10.1016/j.jmapro.2021.04.019

4. Kumar, A.S., Deb, S., Paul, S., 2020. Tribological characteristics and micromilling performance of nanoparticle enhanced water based cutting fluids in minimum quantity lubrication. Journal of Manufacturing Processes 56, 766–776. https://doi.org/10.1016/j.jmapro.2020.05.032

5. Kar, S., Kumar, S., Bandyopadhyay, P.P., Paul, S., 2020. Grinding of hard and brittle ceramic coatings: Force analysis. Journal of the European Ceramic Society 40, 1453–1461. https://doi.org/10.1016/j.jeurceramsoc.2019.12.058

6. Kar, S., Kumar, A.S., Bandyopadhyay, P.P., Paul, S., 2020. Grindability of plasma sprayed thermal barrier coating using super abrasive wheel. Transactions of the IMF 98, 30–36. https://doi.org/10.1080/00202967.2020.1697572

7. Anand, N., Kumar, A.S., Paul, S., 2019. Effect of cutting fluids applied in MQCL mode on machinability of Ti-6Al-4V. Journal of Manufacturing Processes 43, 154–163. https://doi.org/10.1016/j.jmapro.2019.05.029

8. Kumar, A.S., Kar, S., Bandyopadhyay, P.P., Paul, S., 2018. Grinding of ceramics – sintered ceramics versus ceramic coatings. Advances in Materials and Processing Technologies 4, 538–547. https://doi.org/10.1080/2374068X.2018.1479820

Patent

1. Kumar, A.S., Paul, S., Deb, S., 2024. Ultrasonic Vibration Assisted Abrasive Micro-Deburring Employing a Sonotrode. 506209.

1. Saha, S., Sikdar, S., Kumar, A.S., Deb, S., Bandyopadhyay, P.P., 2023. Dependency of Machining Forces on Process Parameters During Sustainable MQL-Based Micro-milling of D2 Steel, in: Bhattacharyya, B., Mathew, J., Saravanakumar, N., Rajeshkumar, G. (Eds.), Advances in Micro and Nano Manufacturing and Surface Engineering, Lecture Notes in Mechanical Engineering. Springer Nature Singapore, Singapore, pp. 119–128. https://doi.org/10.1007/978-981-19-4571-7_11

2. Saha, S., Sravan Kumar, A., Deb, S., Pratim Bandyopadhyay, P., 2020. An investigation on the top burr formation during Minimum Quantity Lubrication (MQL) assisted micromilling of copper, in: Materials Today: Proceedings. pp. 1809–1814. https://doi.org/10.1016/j.matpr.2020.02.379

3. Kumar, A.S., Deb, S., Paul, S., 2018. A Study on Micro-Milling of Aluminium 6061 and Copper With Respect to Cutting Forces, Surface Roughness and Burr Formation, in: Volume 4: Processes. Presented at the ASME 2018 13th International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers, College Station, Texas, USA, p. V004T03A014. https://doi.org/10.1115/MSEC2018-6570

Winter Semester 2024-25

ME3112D - Metrology and Instrumentation [B.Tech]

ME6312E - Machine Tools - Design and Control [M.Tech - Manufacturing Technology]

ME3193D - Production Engineering Laboratory II [B.Tech]

B.Tech

• ME1001E - Computer Programming and Numerical Methods
• ME1311E - Materials Science
• ME3104D - Principles of Management
• ME3193D - Production Engineering Laboratory II
• ME3194D - Production Technology Lab II

M.Tech

• ME6325E - Micro and Nano Manufacturing Processes
• ME6312E - Machine Tools - Design and Control

1. "Investigation of Ultrasonic Cavitation-Assisted Surface Finishing Process for Additively Manufactured Components", PM-Early Career Research Grant, sponsored by ANRF, sanctioned amount: ₹ 58,94,056/-, duration: June 2025 - ongoing.

Aswathy V G

• Joined: Dec 2023
• Research area: Ultrasonic cavitation peening of additively manufactured tool steel
• Joint supervisor: Dr. Arun Babu K

Vinodh G

• Joined: Jul 2024
• Research area: Ultrasonic cavitation abrasive finishing of Inconel alloys
• Joint supevisor: Dr. Nehem Tudu

Gokul Manohar

• Research area: Investigation of influence of porosity and subsequent heat treatments on wear characteristics of Al10SiMg fabricated using Laser Powder Bed Fusion
• Joint supervisor: Dr. Vikash Kumar

Aneesh Baiju

• Research area: Development of engineered wood-plastic composites and their mechanical properties
• Joint supervisor: Dr. Ummen Sabu

• Potnuru S H H P S Raja Ratan (M.Tech, 2023)
• Bannela Prudvi (M.Tech, 2023)
• Amal Ameen K K (M.Tech, 2023)

ORCiD: https://orcid.org/0000-0002-6101-1358

Google Scholar: https://scholar.google.com/citations?user=y-bALSUAAAAJ&hl=en