Looking for PhD students in the following area ( but not limited to) 

Machining

 Conventional , Unconventional machining, Additive Manufacturing), Machining of advanced materials and developement of new lubricants and coolants and machining tribology. 

Materials and Processing 

Conventional materials, Advanced materials including Semiconductor materials, Proces Developement, Characterisation, Developement of new materails for innovative applications

Surface Engineering 

Surface modifications, Coatings, Laser processes and other advanced processes and characterisation techniques 

Tribology                 

New materials, Developement of new Lubricants, Characterisation and synthesis of lubricants, Wear and Friction analysis in Design and Manfucaturign area

Vibration and Vibration control   

Device developement for isolation and absorption ,Vibration  control (Devices and Techniques)  synthesis and new materials for  vibration controls ( Meta materials etc)

--------------------------------------------

Prosepective PhD students , can contact me with Short CV and Short proposal sheet .  jagdishsg@nitc.ac.in and my mobile no is 8547193373

---------------------------------------------

     Selected Journal Publications

1. B Supriya, Aswatha, Manjunath Bangalore Thimmaiah, S ShivaPrakash, Avinash Lakshmikanthan, T Jagadeesha, Wear Behaviour of AA2219-B4C Composite Fabricated via Stir Casting Followed by Age Hardening, Journal of The Institution of Engineers (India): Series D, 1-15,2024.
2. Preetha Jagannathan, Santosh Kumar Tamang, R Thanigaivelan, T Jagadeesha, Optimization of Laser Parameters Using NSGA-II for the Generation of Bioinspired Surface, Surface Review and Letters,2024
3. R Vijaya Kumar, MM Venugopal, KG Christiyan, P Balachandra, T Hemanth Raju, B Manjunatha, T Jagadeesha, Nikhil Rangaswamy, GA Manjunath, S Udayashankar, Taguchi Analysis for Wear Characteristics of Al6063 Alloy–Zirconium Silicate Composites, Journal of The Institution of Engineers (India): Series D, 1-16,2024.
4. S Gowthaman, T Jagadeesha, Impact of nano crack and loading direction on the tensile features of FeCr alloy: a molecular dynamics analysis, Functional Composites and Structures, 6(1), 015002,2024.
5. Prasad, C.D., Kollur, S., Aprameya, C.R. Jagadeesha T. Investigations on Tribological and Microstructure Characteristics of WC-12Co/FeNiCrMo Composite Coating by HVOF Process. JOM 76, 186–195 (2024). https://doi.org/10.1007/s11837-023-06242-2
6. MB Kumbhar, RG Desavale, T Jagadeesha, Experimentation and Damping Performance Analysis of a MR Damper for Resonance Control in a Quarter Car Suspension System, Journal of Vibration Engineering & Technologies, 1-11, 2023
7. S Gowthaman, T Jagadeesha, Effect of Severe Plastic Deformation During Slot Milling on Nimonic 263 Surface Features, Transactions of the Indian Institute of Metals, 76(10), 2807-2814,2023. 10.1007/s12666-023-02920-6
8. R Health Royal Hermonson, R Thanigaivelan, Vinod Kavya, K Rathinasamy, T Jagadeesha, Performance of electrochemically deposited hydroxyapatite on textured 316L SS for applications in biomedicine, Surface Engineering, 39 (1-12), 882-891,2023
9. MB Kumbhar, RG Desavale, T Jagadeesha, Structural optimization for effective damping force of a magneto-rheological damper for high velocity application, NanoWorld Journal, 9(S1), S615-S620,2023. 10.17756/nwj.2023-s1-119
10. S Gowthaman, T Jagadeesha, Impact of point defects on the creep behaviour of MgY Polycrystal: A molecular dynamics study, Materials Letters,335, 133794, 2023. 10.1016/j.matlet.2022.133794
11. T Hemanth Raju, Manjunatha, G Saravanakumar, Suresh Erannagari, T Jagadeesha, Amithkumar Gajakosh, Thermal Conductivity of Hot-Rolled Al7075/TiB2/Graphite Hybrid MMCs, Journal of The Institution of Engineers (India): Series D,1-12, 2023. 10.1007/s40033-023-00448-z
12. Ashokkumar R. Tavadi · N. Nagabhushana · V. N. Vivek Bhandarkar· T. Jagadeesha, Investigation on Mechanical and Sliding Wear Behavior of Pongamia-Oil-Cake/Basalt Fiber-Reinforced Epoxy Hybrid Composites, Arabian Journal for Science and Engineering, 2024. https://doi.org/10.1007/s13369-023-08207
13. S Gowthaman, T Jagadeesha, Veeman Dhinakaran, Analysis on the Impact of Creep Environment and Grain Size During Biaxial Creep Characterization on the Creep Features of Ferrosilicon Alloy: a Molecular Dynamics Study, Silicon, Springer Netherlands,14(17), 11633-11646, 2022. 10.1007/s12633-022-01887-1
14. S Gowthaman, T Jagadeesha, V Dhinakaran, A study on the point defect effects on the monolithic silicon carbide tensile features: a molecular dynamics study, Silicon, Springer Netherlands,14(14), 8427-8438, 2022. 10.1007/s12633-022-01654-2
15. S Gowthaman, T Jagadeesha, V Dhinakaran, Experimental investigation on elastic constants transformation on slot milled Nimonic263 alloy, Sādhanā, Academy Proceedings in Engineering Sciences47(3), 142, 2022. 10.1007/s12046-022-01922-2
16. Gowthaman, S., Jagadeesha, T. & Dhinakaran, V. Influence of Creep Conditions and Grain Size on the Creep Behavior of Nano-Twinned Silicon Carbide Polycrystal: A Molecular Dynamics Study. Silicon 14, 11381–11394 (2022). https://doi.org/10.1007/s12633-022-01873-7
17. P Suresh Kumar, C Sasikumar, S Thanga Kasi Rajan, T Jagadeesha, L Natrayan, M Ravichandran, Dhinakaran Veeman, Wojciech Borek, Evaluation of mechanical and wear properties of AA6063/(Si3N4)6%-12%/(CuN2O6)2%-4%composite via PM route and optimization through robust design technique, Materials Research Express, 9(7), 076502, 2022. 10.1088/2053-1591/ac7d41
18. P Sureshkumar, T Jagadeesha, L Natrayan, M Ravichandran, Dhinakaran Veeman, SM Muthu, Electrochemical corrosion and tribological behaviour of AA6063/Si3N4/Cu (NO3) 2 composite processed using single-pass ECAPA route with 120 die angle, Journal of Materials Research and Technology, 16,715-733, 2022. 10.1016/j.jmrt.2021.12.020
19. S Gowthaman, T Jagadeesha, V Dhinakaran, Comparative study on the effect of temperature, pressure and grain size on the creep behavior of monolithic titanium aluminide alloy through molecular dynamics simulation, Transactions of the Indian Institute of Metals, 75(1),149-159,2022. 10.1007/s12666-021-02410-7
20. S Gowthaman, T Jagadeesha, Study on the effect of temperature and strain rate on Ni2FeCrCuAl high entropy alloy: a molecular dynamics study, Engineering Research Express, 3(4), 045042, 2021. 10.1088/2631-8695/ac3e10
21. S Gowthaman, T Jagadeesha, Comparative study on the critical effect of radial rake angle and machining parameters on the formation of vibration amplitude during end milling of Nimonic 263, Sādhanā, Academy Proceedings in Engineering Sciences 46(4), 191, 2021. 10.1007/s12046-021-01723-z
22. S Gowthaman, T Jagadeesha, V Dhinakaran, Influence of machining behavior on severe deformation and corrosion resistance of end milled Nimonic 263 alloy, Sādhanā, Academy Proceedings in Engineering Sciences 46(4), 112, 2021. 10.1007/s12046-021-01726-w
23. L Natrayan, M Ravichandran, Dhinakaran Veeman, P Sureshkumar, T Jagadeesha, Wubishet Degife Mammo, Influence of nanographite on dry sliding wear behaviour of novel encapsulated squeeze cast Al-Cu-Mg metal matrix composite using artificial neural network, Journal of Nanomaterials,2021, 1-14, 2021.
24. L Natrayan, M Ravichandran, Dhinakaran Veeman, P Sureshkumar, T Jagadeesha, R Suryanarayanan, Wubishet Degife Mammo, Enhancement of mechanical properties on novel friction stir welded Al-Mg-Zn alloy joints reinforced with Nano-SiC particles, Journal of Nanomaterials,2021, 1-10, 2021. 10.1155/2021/2555525
25. Dhinakaran Veeman, M Varsha Shree, P Sureshkumar, T Jagadeesha, L Natrayan, M Ravichandran, Prabhu Paramasivam, Sustainable development of carbon nanocomposites: synthesis and classification for environmental remediation, Journal of Nanomaterials,2021, 1-21, 2021. 10.1155/2021/5840645
26. S Gowthaman, T Jagadeesha, Experimental investigation on friction formation during slot milling of Nimonic263, Materials and Manufacturing Processes, 36(12), 1403-1413, 2021. 10.1080/10426914.2021.1906899
27. S Gowthaman, T Jagadeesha, Effect of severe plastic deformation during slot milling on wear resistance and surface characteristics of nimonic 263 alloy, Engineering Research Express, 3(3), 035006,2021. 10.1088/2631-8695/ac0fc1
28. Dhinakaran Veeman, M Swapna Sai, P Sureshkumar, T Jagadeesha, L Natrayan, M Ravichandran, Wubishet Degife Mammo, Additive manufacturing of biopolymers for tissue engineering and regenerative medicine: an overview, potential applications, advancements, and trends, International Journal of Polymer Science, 2021, 1-21, 2021. 10.1155/2021/4907027
29. MB Kumbhar, VG Salunkhe, AV Borgaonkar, T Jagadeesha, Mathematical modeling and experimental evaluation of an air spring–air damper dynamic vibration absorber, Journal of Vibration Engineering & Technologies, 9, 781-789, 2021. 10.1007/s42417-020-00263-w
30. Vishal G Salunkhe, Ramchandra Ganapati Desavale, T Jagadeesha, Experimental frequency-domain vibration-based fault diagnosis of roller element bearings using support vector machine, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 7(2), 021001, American Society of Mechanical Engineers, 2021. 10.1115/1.4048770
31. Amith kumar Gajakosh, R Keshavamurthy, T Jagadeesha, R Suresh Kumar, Investigations on mechanical behavior of hot rolled Al7075/TiO2/Gr hybrid composites, Ceramics International,47(10), 14775-14789, 2021. 10.1016/j.ceramint.2020.10.236.
32. S Gowthaman, T Jagadeesha, Experimental study on the surface and interface phenomenon changes by means of contact angle measurement on slot milled nimonic 263 alloy, Materials Letters, 285, 129122, 2021. 10.1016/j.matlet.2020.129122
33. Rakesh Kumar, R Thanigaivelan, GK Rajanikant, T Jagadeesha, Jyotirekha Das, Evaluation of hydroxyapatite-and zinc-coated Ti-6Al-4V surface for biomedical application using electrochemical process, Journal of the Australian Ceramic Society,57, 107-116, 2021. 10.1007/s41779-020-00517-6
34. L Natrayan, M Ravichandran, Dhinakaran Veeman, P Sureshkumar, T Jagadeesha, Wubishet Degife Mammo, Influence of Nanographite on Dry Sliding Wear Behaviour of Novel Encapsulated Squeeze Cast Al-Cu-Mg Metal Matrix Composite Using Artificial Neural Network, Journal of Nanomaterials ,2021, Article ID 4043196, 1-14, 2021. https://doi.org/10.1155/2021/4043196
35. L Natrayan, M Ravichandran, Dhinakaran Veeman, P Sureshkumar, T Jagadeesha, R Suryanarayanan, Wubishet Degife Mamm, Enhancement of Mechanical Properties on Novel Friction Stir Welded Al-Mg-Zn Alloy Joints Reinforced with Nano-SiC Particles, Journal of Nanomaterials, 2021, Article ID 2555525, 10 pages https://doi.org/10.1155/2021/2555525.
36. S Gowthaman, T Jagadeesha, Influence of cutting environment and machining parameters on the cutting force and surface roughness of slot milled Nimonic 263 alloy, Multiscale and Multidisciplinary Modeling, Experiments and Design, 1-10, 2021. 10.1007/s41939-021-00102-9
37. S Gowthaman, T Jagadeesha, Investigation on the effect of temperature, pressure and grain size on the creep behavior of nickel-chromium binary alloy through molecular dynamics simulation, Engineering Research Express, 3(1), 025045, 2021
38. S Gowthaman, T Jagadeesha, Effect of point defects on the tensile and thermal characteristics of nickel–aluminum nanowire through molecular dynamics, Transactions of the Indian Institute of Metals,73, 2481-2489, 2020.
39. S Gowthaman, T Jagadeesha, Effect of severe plastic deformation through machining on the microstructure and corrosion behavior of end milled Nimonic 263 alloy, Materials Letters, 275, 128102,2020. 10.1016/j.matlet.2020.128102
40. S Gowthaman, T Jagadeesha, Influence of radial rake angle and cutting conditions on friction during end milling of Nimonic 263, The International Journal of Advanced Manufacturing Technology,109,247-260,2020. 10.1007/s00170-020-05682-3
41. S Gowthaman, T Jagadeesha, Experimental investigations on the effect of severe plastic deformation through end milling on x-ray peak broadening and microcrystalline characteristics of Nimonic 263, Transactions of the Indian Institute of Metals,73, 1215-1226, 2020
42. S Gowthaman, T Jagadeesha, Comparative studies of variation in end mill radial rake angle and cutting conditions on cutting force and surface integrity during machining of Nimonic 263, Materials Research Express, 7(3), 036503, 2020. 10.1088/2053-1591/ab7ab9
43. N Subhash, T Jagadeesha, Mohit Law, Investigations on machinability and machining stability of turning super duplex stainless-steel International Journal of Machining and Machinability of Materials,22(5), 386-405,2020. 10.1504/IJMMM.2020.109849
44. S Gowthaman, T Jagadeesha, An experimental investigation on the effect of radial rake angle and machining conditions during end milling on wear resistance and residual stress of nimonic 263 alloy, Materials Research Express, 6(12) 126568,2019. 10.1088/2053-1591/ab5825
45. Rakesh Jinaga, T Jagadeesha, Shreedhar Kolekar, Seung-Bok Choi, The synthesis of organic oils blended magnetorheological fluids with the field-dependent material characterization, International Journal of Molecular Sciences,20(22), 5766,2019. 10.3390/ijms20225766
46. S Gowthaman, T Jagadeesha, Effect of variation in behavioural changes during end milling on Nimonic 263 elastic constants, Materials Research Express,6(12), 126504,2019. 10.1088/2053-1591/ab5345
47. S Gowthaman, T Jagadeesha, Experimental investigation of surface morphological changes during end milling of Nimonic 263, Surface Topography: Metrology and Properties, 7(4), 045018,2019. 10.1088/2051-672X/ab5036
48. Jinaga, R., Thimmaiah, J., Kolekar, S. et al. Design, fabrication and testing of a magnetorheological fluid braking system for machine tool application. SN Appl. Sci. 1, 328 (2019). https://doi.org/10.1007/s42452-019-0236-7
49. T Jagadeesha, Experimental studies in weld nugget strength of resistance spot-welded 316L austenitic stainless-steel sheet, The International Journal of Advanced Manufacturing Technology,93, 505-513,2017.
50. T Jagadeesha, TJ Sarvoththama Jothi, Studies on the influence of process parameters on the AISI 316L resistance spot-welded specimens, The International Journal of Advanced Manufacturing Technology,93 73-88,2017.
51. T Jagadeesha, Louis Kim, Joseph Gonsalvis, Thammaiah Gowda, Innovative low pressure borophosphosilicate glass processes for nano devices, Indian Journal of Engineering & Materials Sciences, 16, 341-346,2009.
52. T Jagadeesha, Daping Yao, Kimberly Branshaw, Louis Kim, Noval Atomic Layer Deposition For Advanced Tugsten Nucleation Layer For Nano Structures, Journal of Manufacturing Engineering,4(1),69-72, 2009

        Accepted Paper and in progress

1. Vikram Kamble, Jagadeesha, Shreedhar, Materials, Fabrication and Characterization of Magneto-Sensitive Elastomers: Detailed State of the Art, Emerging Materials Research. Revision submitted to Editor.

        Submitted paper

1. Mohamad Ansari, Jagadeesha T, Laser Textured Ti-6Al-4V with Multi Bio coating for Improved Osseointegration. Submitted to Surface Engineering, Taylor and Francis submitted on 24 May 24.  Manuscript id SEN-24-0166.
2. Abhishek Kumar, Manoj Nikam, Jagadeesha T, Experimental and mathematical modelling of Super alloy MONEL 400 EDM machining parameters, submitted to Journal of Materials Research and Technology on 16 May 2024. Paper id JMRT-D-24-03994.
3. Manjunath Bangalore Thimmaiah; Sujith Kumar S G; Shiva Prakash S; Jagadeesha T; Prasad U Raikar; Madhusudhana H K; Balaraj V; Amithkumar Gajakosh, Investigation of Mechanical Properties of 3D-Printed PLA with CNT Nano Composites, Journal of The Institution of Engineers (India): Series D
4. Mahadev Kumbhar; Ramchandra G Desavale; T Jagadeesha, Enhanced Effectiveness of an Variable Stiffness and Damping Analysis of an Elastically Supported Air Spring-Air Damper, Arabian Journal for Science and Engineering (AJSE), paper id EMID:313f7c0287c88ee2, Submitted on 30 March 2024.

Conference papers

1. Bannela Prudvi, Shivani Kumar, T Jagadeesha, Analysis of Exponential Horn in the Ultrasonic Machining Through Numerical Investigation, First International Conference on Advances in Electrical, Electronics and Computational Intelligence (ICAEECI), IEEE, 1-9, 2023
2. Pranjal Srivastava, M Manikandan, T Jagadeesha, Numerical Study of Temperature and Plasma Field in Laser Ablation of Inconel 718 superalloy, First International Conference on Advances in Electrical, Electronics and Computational Intelligence (ICAEECI), IEEE, 1-9, 2023
3. PV Maneesh Kumar, T Jagadeesha, Synthesis of Estolides from Coconut, Sunflower and Karanja Oils, International Conference on Inventive Material Science Applications, Springer Nature Singapore 53-62,2023.
4. Abhishek Kumar, T Jagadeesha, Experimental Investigation of Machining Parameters of Monel 400 in Powder Mixed EDM Process, International Conference on Inventive Material Science Applications, Springer Nature Singapore 43-51,2023
5. PV Maneesh Kumar, T Jagadeesha, Advanced Characterization of Estolides from Coconut, Sunflower and Karanja Oils, International Conference on Inventive Material Science Applications, Springer Nature Singapore 113-125,2023
6. MB Kumbhar, RG Desavale, T Jagadeesha, Recent advances in magnetorheological damping systems for automotive technology, Conference of Innovative Product Design and Intelligent Manufacturing System,122-133, 2022
7. A Hafsana, Athul Vijay, Manas P Vinayan, Bijja Kavya, T Jagadeesha, Comparative Study of Magnetorheological Brakes from Magnetic Theory Perspective by Finite Element Methods, Modelling, Simulation and Optimization: Proceedings of CoMSO 2021, Springer Nature Singapore, 339-348,2022. 10.1007/978-981-19-0836-1_25. Part of the Smart Innovation, Systems and Technologies book series (SIST, volume 292).
8. Peri Krishna Karthik, T Jagadeesha, Performance Analysis of Disc Type Magnetorheological Brake with Tapered Disc, Modelling, Simulation and Optimization: Proceedings of CoMSO 2021, Springer Nature Singapore, 321-328,2022. 10.1007/978-981-19-0836-1_23. Part of the Smart Innovation, Systems and Technologies book series (SIST,volume 292)
9. Shaik Faazil Ahmad, T Jagadeesha, Dynamic characteristics analysis of Kirloskar turn master35 machine tool bed with different polymer concrete materials, Modelling, Simulation and Optimization: Proceedings of CoMSO 2021, Springer Nature Singapore, 329-338,2022. 10.1007/978-981-19-0836-1_24. Part of the Smart Innovation, Systems and Technologies book series (SIST, volume 292)
10. Athul Vijay, Manas P Vinayan, A Hafsana, T Jagadeesha, Topological Optimization of Spiral Springs, Recent Advances in Manufacturing Modelling and Optimization: Select Proceedings of RAM 2021, Springer Nature Singapore, 253-264,2022. 10.1007/978-981-16-9952-8_24
11. Athul Vijay, Manas P Vinayan, A Hafsana, T Jagadeesha, Numerical Investigation and Comparison of Stress Concentration Factor in Threaded Bolts, Recent Advances in Manufacturing Modelling and Optimization: Select Proceedings of RAM 2021, Springer Nature Singapore, 95-105,2022. 10.1007/978-981-16-9952-8_10
12. Athul Vijay, Manas P Vinayan, A Hafsana, T Jagadeesha, Design, Fatigue Analysis, and Optimization of Propeller Shafts Using Finite Element Analysis, Recent Advances in Manufacturing Modelling and Optimization: Select Proceedings of RAM 2021, Springer Nature Singapore, 241-251,2022. 10.1007/978-981-16-9952-8_23
13. Ganapati Shastry, Ashish Toby, Seung Bok Choi, Vikram G Kamble, T Jagadeesha, Design, modeling, and simulation of Low-Cost magnetorheological fluid-based prosthetic leg, Recent Advances in Manufacturing Modelling and Optimization: Select Proceedings of RAM 2021, Springer Nature Singapore, 281-294,2022. 10.1007/978-981-16-7787-8_20
14. RG Desavale, Jitendra Kumar Katiyar, T Jagadeesha, The Diagnostic Analysis of the Rolling Element Bearings for the Machine Tool Applications Using Dimension Theory, Recent Advances in Manufacturing, Automation, Design and Energy Technologies: Proceedings from ICoFT 2020, 711-718, 2022. 10.1007/978-981-16-4222-7_79
15. RG Desavale, Jitendra Kumar Katiyar, T Jagadeesha, Vibrations Characteristics Analysis of Rotor-Bearings System Due to Surface Defects Based in CNC Machines, Recent Advances in Manufacturing, Automation, Design and Energy Technologies: Proceedings from ICoFT 2020, 705-710, 2022. 10.1007/978-981-16-4222-7_78
16. Krishna Karthik Peri, Seung-Bok Choi, T Jagadeesha, Effect of Disc Parameters on the Braking Torque of Disc Type Magnetorheological Brake, 2021 IEEE Bombay Section Signature Conference (IBSSC), 1-4, 2021. 10.1109/IBSSC53889.2021.9673165
17. M. P. Vinayan, A. Vijay, H. A, Jagadeesha  T, S. B. Choi and H. Nguyen Quoc, Reliability estimation of Magnetorheological Fluid Brakes for Electrical Vehicles," 2021 IEEE Bombay Section Signature Conference (IBSSC), Gwalior, India, 2021, pp. 1-5, doi: 10.1109/IBSSC53889.2021.9673400.
18. Vishal G Salunkhe, RG Desavale, T Jagadeesha, A numerical model for fault diagnosis in deep groove ball bearing using dimension theory, Materials Today: Proceedings, 47, 3077-3081, 2021. 10.1016/j.matpr.2021.06.072
19. BB Chandan, Belagavi Vinaya, S Udayashankar, T Jagadeesha, Amith Kumar Gajakosh, Influence of zircon particles on the characterization of Al7050-Zircon composites, Materials Today: Proceedings,47, 2241-2246, 2021. 10.1016/j.matpr.2021.04.194
20. S Perichiyappan, T Jagadeesha, Modelling and simulation of primary suspension springs used in Indian railways, Materials Today: Proceedings,46, 8450-8454, 2021. 10.1016/j.matpr.2021.03.478
21. HS Panda, T Jagadeesha, Impact analysis of rifle bullet on corrugated sandwich panel structures for defense applications, Materials Today: Proceedings, 45, 8444-8449, 2021. 10.1016/j.matpr.2021.03.477
22. Shaik Faazil Ahmad, T Jagadeesha, Modelling and dynamic simulation of polymer concrete material for machine tool structure of a lathe, Materials Today: Proceedings 45,  5732-5738,2021. 10.1016/j.matpr.2021.02.552
23. Ashish Tiwari, T Jagadeesha, Fatigue crack growth of additively manufactured component under constant amplitude load, Materials Today: Proceedings 45, 5720-5724,2021
24. Ganapati Shastry, Ashish Toby, MB Kumbhar, VG Salunkhe, T Jagadeesha, Simulation and optimization of materials used for prosthetic leg for above-knee amputees using MR fluid, Materials Today: Proceedings, 45, 5292-5298,2021. 10.1016/j.matpr.2021.01.862
25. S Gowthaman, T Jagadeesha, Influence of temperature and strain rate on the characteristics of FeNi precipitate through molecular dynamics simulation, Materials Today: Proceedings, Elsevier, 45, 5292-5298,2021.
26. S Gowthaman, T Jagadeesha, Effect of cross section and temperature on the Ni3Al precipitate on the tensile behavior through molecular dynamics simulation, Materials Today: Proceedings, Elsevier, 46, 1142-1146,2021. 10.1016/j.matpr.2021.02.057
27. S Gowthaman, T Jagadeesha, Analysis on the effect of temperature o the Ni2Al3 precipitate tensile characteristics through molecular dynamics simulation, Materials Today: Proceedings, Elsevier, 46, 1139-1141,2021.
28. Vikram G Kamble, Shreedhar Kolekar, HS Panda, Shatha Ammourah, T Jagadeesha, Magneto rheological fluid: Fabrication and characterization of its temperature-dependent properties, Materials Today: Proceedings, Elsevier, 46, 4813-4818,2021. 10.1016/j.matpr.2021.01.292
29. V Dhinakaran, A Rahul Kumar, Rishiekesh Ramgopal, Surendar Kannan, B Stalin, T Jagadeesha, Topology optimization of steering knuckle, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019. 197-206,2021. 10.1007/978-981-15-4739-3_17
30. Mukesh Kumar Choudhary, V Dhinakaran, T Jagadeesha, Wear Behaviour of Duplex Stainless-Steel Spur Gear Produced by CNC Wire Electro-discharge Machining Under Wet Lubrication—An Experimental Approach, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 397-406, 2021. 10.1007/978-981-15-4739-3_33
31. D Narayanan, VG Salunkhe, V Dhinakaran, T Jagadeesha, Experimental evaluation of cutting process parameters in cryogenic machining of duplex stainless steel, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 505-516, 2021. 10.1007/978-981-15-4739-3_44
32. Shreedhar Kolekar, V Dhinakaran, T Jagadeesha, Choi Seung Bok, Design, Fabrication and Testing of Magnetorheological Damper System for Machine Tool Application, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 13-31, 2021. 10.1007/978-981-15-4739-3_2
33. Mukesh Kumar Choudhary, V Dhinakaran, T Jagadeesha, Comparison of Duplex Stainless Steel (2205) Spur Gears Cut by Wire Electro discharge Machining (WEDM) and Hobbing Under Dry Condition, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 275-283, 2021. 10.1007/978-981-15-4739-3_23
34. Jacob, V Dhinakaran, T Jagadeesha, Mechanical and Tribological Properties of Al–Mg–SiC Metal Matrix Composite for Pistons of Two-Stroke Engine, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 673-683, 2021. 10.1007/978-981-15-4739-3_58
35. T Jagadeesha, VG Salunkhe, RG Desavale, PB Patil, MB Kumbhar, AR Koli, Investigation of Crack Detection Technique in a Rotating Shaft by Using Vibration Measurement, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 631-645, 2021. 10.1007/978-981-15-4739-3_54
36. N Subhash, V Dhinakaran, T Jagadeesha, Finite Element Modelling of Cutting Forces in Turning of Ti–6Al–4V Alloy, Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, 439-446, 2021. 10.1007/978-981-15-4739-3_37
37. V Dhinakaran, T Jagadeesha, Tribological characterization of electrolytic hard chrome & WC-C0 coatings, Materials Today: Proceedings, 46, 9176-9179, 2021. 10.1016/j.matpr.2020.01.197
38. B Ganga Nair, Nathan Job Antony, Sebin Sabu Mathew, T Jagadeesha, Modelling and Simulation of Magneto-rheological Fluid in a Damper Using COMSOL, International Conference on Future technologies in Manufacturing, Automation, Design and Energy, Springer Nature Singapore, 463-472, 2023.
39. Peri Krishna Karthik, Kotipalli Hemanth Harsha, Natla Vishnu Vardhan Reddy, T Jagadeesha, Magnetic Analysis of Magnetorheological Brake with Multiple Conductor Paths Using COMSOL, International Conference on Future technologies in Manufacturing, Automation, Design and Energy, Springer Nature Singapore, 481-488, 2023.
40. Srinivasa Advaith Thutupalli, Grandhi Sri Sai Charith, Doppalapudi Manohar, Choppala Sarath, Saleel Ismail, T Jagadeesha, Fault Bearing Detection from Vibrational Signal Data by Using Machine Learning Algorithms, Proceedings of the 2nd International Conference on Future Technologies on Manufacturing, Automation, Design and Energy. NIT Puducherry.  451-462, 2023. https://doi.org/10.1007/978-981-99-1288-9
41. S Adharsh, A Abul Kalam Azad, Fathima Yasin Fahmidha, V Dhinakaran, T Jagadeesha, Review on 3d Printing of Biological Tissues and the Materialization, IOP Conference Series: Materials Science and Engineering, 988(1), 012128. 10.1088/1757-899X/988/1/012128
42. Muhammad Rashid, V Dhinakaran, T Jagadeesha, Topology optimization of rigid flanged couplings using finite element analysis, AIP Conference Proceedings, 2283(1), 2020. 10.1063/5.0024913
43. Rahul Agarwal, V Dhinakaran, T Jagadeesha, Fatigue analysis of similar and dissimilar spot welds, AIP Conference Proceedings, 2283(1), 2020. 10.1063/5.0024909
44. CH Kishore, V Dhinakaran, T Jagadeesha, Study and analysis of stress and pressure variations on Indian railway wheel, AIP Conference Proceedings, 2283(1), 2020. 10.1063/5.0024912
45. S Prajwal, V Dhinakaran, T Jagadeesha, Size optimization of shoulder filleted shafts with relief grooves for improving their fatigue life, AIP Conference Proceedings, 2283(1), 2020. 10.1063/5.0024911
46. Nihal Saji, V Dhinakaran, T Jagadeesha, Finite element analysis of strength of different non-permanent joints subjected to eccentric loading, AIP Conference Proceedings, 2283(1), 2020. 10.1063/5.0024910
47. P Giridhar Reddy, S Gowthaman, T Jagadeesha, Optimization of cutting parameters based on surface roughness and cutting force during end milling of Nimonic C-263 Alloy, IOP Conference Series: Materials Science and Engineering,912(3), 032020,2020. 10.1088/1757-899X/912/3/032020
48. Ankamreddi Praveen, T Jagadeesha, Synthesis and characterization of cost effective and eco-friendly magneto rheological fluid for aerospace applications, IOP Conference Series: Materials Science and Engineering, 912(3), 022027,2020. 10.1088/1757-899X/912/2/022027
49. G Chandra Mouli, K Prakash Marimuthu, T Jagadeesha, 2D finite element analysis of inconel 718 under turning processes, IOP Conference Series: Materials Science and Engineering, 912(3),  032021,2020. 10.1088/1757-899X/912/3/032021
50. Shubham Shekhar, S Gowthaman, T Jagadeesha, Effect of MQL, wet and dry lubrication on functional behavior of end milled nimonic-263, IOP Conference Series: Materials Science and Engineering, 912(3), 032019,2020. 10.1088/1757-899X/912/3/032019
51. V Dhinakaran, M Varsha Shree, T Jagadeesha, PM Bupathi Ram, T Sathish, B Stalin, A review on the recent developments in modeling heat and material transfer characteristics during welding. Materials Today Proceedings 21(1), 908-911, 2020. https://doi.org/10.1016/j.matpr.2019.08.079.
52. V Dhinakaran, J Ajith, A Fathima Yasin Fahmidha, T Jagadeesha, T Sathish, B Stalin, Wire Arc Additive Manufacturing (WAAM) process of nickel-based superalloys–A review, Materials Today: Proceedings.21, 920-925,2020. 10.1016/j.matpr.2019.08.159
53. D Narayanan, T Jagadeesha, Process capability improvement using internally cooled cutting tool insert in cryogenic machining of super duplex stainless steel 2507, Innovative Product Design and Intelligent Manufacturing Systems: Select Proceedings of ICIPDIMS 2019,323-330,2020. 10.1007/978-981-15-2696-1_31
54. Amith Kumar Gajakosh, T Jagadeesha, Mechanical, tribological and theological studies on hybrid aluminium matrix composite reinforced with silicon carbide and reduced graphene oxide, Materials Today: Proceedings,24, 343-349, 2020.
55. T Jagadeesha, Louis Kim, Nitride film deposition using ammonia plasma pre-treatment to promote good adhesion of nitride film to copper, Materials Today: Proceedings,24, 284-289, 2020. 10.1016/j.matpr.2020.04.277
56. G Amith Kumar, T Jagadeesha, Optimization of Tool Wear and Surface Roughness of Hybrid Ceramic Tools, Advanced Engineering Optimization Through Intelligent Techniques: Select Proceedings of AEOTIT 2018, Springer Singapore,699-705,2020. 10.1007/978-981-13-8196-6_61
57. BK Nagesha, V Dhinakaran, M Varsha Shree, KP Manoj Kumar, T Jagadeesha, A review on weldability of additive manufactured titanium alloys, Materials Today: Proceedings,33, 2964-2969, 2020. 10.1016/j.matpr.2020.02.899
58. Rakesh Erappa Jinaga, T Jagadeesha, Synthesis of magnetorheological fluid using electrolytic carbonyl iron powder for enhanced stability, IOP Conference Series: Materials Science and Engineering,577(1), 012014,2019.
59. Vikas Ghungarde, Sudhir Awachar, NK Vaidya, T Jagadeesha, Design optimization of steering knuckle by adopting bionic design approach, IOP Conference Series: Materials Science and Engineering, IIT Madras, 624(1), 012023, 2019. 10.1088/1757-899X/624/1/012023
60. N Subhash, K Prakash Marimuthu, T Jagadeesha, Finite Element Modelling of Temperature in Machining of Duplex Stainless Steel (DSS) 2205, Journal of Physics: Conference Series Volume 1240, 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST) 18–22 February 2019, Kurukshetra, Haryana, India. 10.1088/1742-6596/1240/1/012147
61. Soumya Sambedana, T Jagadeesha, Finite Element Modelling of Cutting Forces in Face Milling of Duplex Stainless Steel 2205 Journal of Physics: Conference Series Volume 1240, 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST) 18–22 February 2019, Kurukshetra, Haryana, India. 10.1088/1742-6596/1240/1/012151
62. G Salunkhe, Amith Kumar Gajakosh, Jacob Jacob, Jagadeesha Thimmaiah, Simulation and experimental studies on sliding wear of aluminum alloy under dry condition using asymmetric contact models, AIP Conference Proceedings,2080(1), 2019
63. VG Salunkhe, Amith Kumar Gajakosh, Rakesh Jinaga, Jagadeesha Thimmaiah, Design and finite element analysis of external fixator used in orthopaedics, AIP Conference Proceedings,2080(1), 2019
64. N Subhash, Soumya Sambedana, P Nithin Raj, T Jagadeesha Experimental study on tool wear and optimization of process parameters using ANN-GA in turning of super-duplex stainless steel under dry and wet conditions, Advances in Manufacturing Technology: Select Proceedings of ICAMT 2018,411-419, 2019. 10.1007/978-981-13-6374-0_47
65. Soumya Sambedana, N Subhash, P Nithin Raj, T Jagadeesha, Experimental study on surface roughness and optimization of process parameters using ANN-GA in milling of super-duplex stainless steel under dry and wet conditions, Advances in Manufacturing Technology: Select Proceedings of ICAMT 2018, 399-409, 2019. 10.1007/978-981-13-6374-0_46
66. T Jagadeesha, Louis Kim, Innovative Nitride Film Deposition on Copper Interconnects of MEMS Devices Using Plasma-Enhanced Chemical Vapor Deposition Techniques, Advances in Manufacturing Technology: Select Proceedings of ICAMT 2018, 105-112, 2019. 10.1007/978-981-13-6374-0_13
67. RR Gokulakrishnan Sriram, V Dhinakaran, T Jagadeesha, Rishiekesh Ramgopal Finite element simulation of temperature distribution and residual stress in single bead on plate weld trial using double ellipsoidal heat source model, International Journal of Recent Technology and Engineering,8, 133-138,2019.
68. Thammaiah Gowda, T Jagadeesha, V Dhinakaran, Optimization of design parameters of aircraft wing structure with large cut outs using damage tolerant design and finite element analysis approach International Journal of Recent Technology and Engineering,8, 128-132,2019.
69. Rithin MR, Rutuvisha, Jagadeesha T, Mathematical modelling, Fabrication and testing of Magnetorheological smart material Damper for engines, 1st International Conference on Advancement in Energy (ऊर्जाSangam-2023) Organized by the Department of Mechanical Engineering, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh (India) During 18th to 20th, December 2023.
70. Biswajith Malik, Jagadeesha T, Numerical simulation, experimental studies and optimization of FSW of dissimilar magnesium alloys (Paper ID: 7) 1st International Conference on Advancement in Energy (ऊर्जाSangam-2023) Organized by the Department of Mechanical Engineering, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh (India) During 18th to 20th, December 2023.
71. Biswajith Malik, Jagadeesha T, Mathematical Modelling and Numerical simulation, FSW of dissimilar magnesium alloys using Eccentric pins configurations, Fourth international conference on advanced engineering optimisation through intelligent techniques (AEOTIT) , Held by the Department of Mechanical Engineering, NIT SURAT , 28-30, 2023
72. Joel Sebastian, Juan Raj, Jayakrishnan P.S, Edwin Roy and Jagadeesha T, Reduction of vibration using variable damping torsional dampers for smart vehicles using real time intelligent smart fluid controls. Fourth international conference on advanced engineering optimisation through intelligent techniques (AEOTIT) , Held by the Department of Mechanical Engineering, NIT SURAT , 28-30, 2023
73. Adithyan A, Anshu Jain, Thomas Varghese, K Arjun Dhinesh and Jagadeesha T Mathematical Modelling And Design Of A Model Reference Adaptive Current Control For A Magneto-Rheological Fluid Based Brake, ICMech-REC-2023 (23 - 25 JUNE 2023), National Institute of Technology, Warangal. 2023
74. GS Anantharam, Basil Kuriachen, T Jagadeesha, Investigation on the influence of cladding environment on the wear property of SiO2 TIG clad over mild steel, International Conference on Mechanical Engineering and Technology, ICMET 2024, NIT Kurukshetra, Harayana,2024.
75. M.B. Kumbhar, Jagadeesha T, Enhancing Biocompatibility and Performance of Smart Materials for Dental Application. International Conference on Innovative Product design and intelligent manufacturing systems (ICIPDIMS – 2023). NIT Rourkela, Odisha, India. 2023.
76. Avinash Kumar Chaturvedi And Jagadeesha T, Experimental Investigation of Turning of Super Duplex Stainless Steel-SDSS 2507 With Single Point Textured Tool with Minimum Quantity Lubrication, ICMech-REC-2023 (23 - 25 JUNE 2023), National Institute of Technology, Warangal. 2023

Book chapters

1. Jagadeesha T,  High-Energy Rate Forming, Analysis and Optimization of Sheet Metal Forming processes, edited by Amrut Mulay, Swadesh Kumar Singh, Andrzej Kocanda, CRC Press, 2024.
2. Sandip Kunar, K Vijetha, Adduri SSM Sitaramamurty, Chanchal Biswas, S Tripathy, T Jagadeesha, Sujana Nowshin, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
3. T Jagadeesha, S Kunar, P Chatterjee, Laser Micro‐and Nano processing, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
4. T Jagadeesha, S Kunar, Introduction to Solid‐State Lasers, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
5. T Jagadeesha, S Kunar, Waterjet‐Guided Laser Cutting Technology, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
6. T Jagadeesha, S Kunar Fundamentals of Laser Machining, Laser‐Assisted Machining: Processes and Applications, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
7. T Jagadeesha, S Kunar, Hybrid Laser Electrochemical Micromachining Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
8. T Jagadeesha, S Kunar, High-Power Laser in Material Processing Applications, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
9. T Jagadeesha, S Kunar, Femtosecond Laser Machining, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024
10. Sandip Kunar, K Vijetha, T Jagadeesha, Abhishek Ghosh, S Rama Sree, Prasenjit Chatterjee, Sreenivasa Reddy Medapati, Nabankur Mandal, Introduction to Laser-Assisted Machining Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024.
11. Sandip Kunar, Abhishek Ghosh, Rajesh Kumar, DV Janaki, T Jagadeesha, Norfazillah Talib, KVSR Murthy, Sreenivasa Reddy Medapati, Prasenjit Chatterjee, Laser‐Assisted Machining for Advanced Materials, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024.
12. T Jagadeesha, Sandip Kunar, Prasenjit Chatterjee, Fundamentals of Laser Welding, Laser‐Assisted Machining for Advanced Materials, Laser‐Assisted Machining: Processes and Applications, John Wiley & Sons, Inc.2024.
13. Golam Kibria, Sandip Kunar, T Jagadeesha, MS Reddy, Prasenjit Chatterjee, Introduction to Micro-Electro Machining and Fabrication, Electro-Micromachining and Microfabrication, Apple Academic Press,2024
14. T Jagadeesha, Sandip Kunar, Golam Kibria, Manoj Nikam, Breakthrough of Powder Additives in Powder Mixed Micro-Electric Discharge Machining, Electro-Micromachining and Microfabrication, Apple Academic Press,2024
15. T Jagadeesha, Sandip Kunar, Golam Kibria, Manoj Nikam, Nano-Additives Assisted MQL and Optimization in Micromachining Processes, Electro-Micromachining and Microfabrication, Apple Academic Press,2024
16. Sandip Kunar, Golam Kibria, Prasenjit Chatterjee, T Jagadeesha, Bh V Prasad, S Rama Sree, MS Reddy, Recent Advancement in Micro texturing Using Electrochemical Micromachining Electro-Micromachining and Microfabrication, Apple Academic Press,2024.
17. T Jagadeesha, Thutupalli Srinivasa Advaith, Choppala Sarath Wesley, Grandhi Sri Sai Charith, Doppalapudi Manohar, Intelligent Manufacturing Management Systems: Operational Applications of Evolutionary Digital Technologies in Mechanical and Industrial Engineering, 157-193, John Wiley & Sons, Inc,2023. 10.1002/9781119836780.ch7
18. Ankit Meena, T Jagadeesha, Manoj Nikam, Seung-Bok Choi, Vikram G Kamble, Design of Energy Harvesting Mechanism for Walking Applications, Advanced Materials for Biomechanical Applications, CRC Press , USA, 273-301, 2022
19. Ganapati Shastry, T Jagadeesha, Ashish Toby, Seung-Bok Choi, Vikram G Kamble, Design of a Low-Cost Prosthetic Leg Using Magnetorheological Fluid, Advanced Materials for Biomechanical Applications, CRC Press, USA, 229-253, 2022
20. Veeman Dhinakaran, Mahesh Varsha Shree, Thimmaiah Jagadeesha, Madabushi Swapna Sai, Additive Manufacturing: Technology, Materials and Applications in Aerospace, Light Weight Materials: Processing and Characterization, 1-22, John Wiley & Sons, Inc. 2022. https://doi.org/10.1002/9781119887669.ch1
21. V Dhinakaran, Jitendra Kumar Katiyar, T Jagadeesha, Mechanics of Metal Removal in Abrasive Jet Machining, Mechatronic Systems Design and Solid Materials, Apple Academic Press, 55-78, 2021
22. V Dhinakaran, Jitendra Kumar Katiyar, T Jagadeesha, Mechanics and Material Removal Modeling and Design of Velocity Transformers in Ultrasonic Machining, Mechatronic Systems Design and Solid Materials, Apple Academic Press, 99-146, 2021
23. Jitendra Kumar Katiyar, P Ramkumar, Rao TVVLN, J Paulo Davim, Synthesis of Magneto Rheological Fluids Using Nickel Particles and Study on Their Rheological behaviour, Tribology in Materials and Applications, Springer International Publishing,2020
24. Rakesh Jinaga, Shreedhar Kolekar, T Jagadeesha, Tribology of Intelligent Magnetorheological Materials, Tribology in Materials and Applications, Springer International Publishing,2020
25. Jitendra Kumar Katiyar, Shantanu Bhattacharya, Vinay Kumar Patel, Vikram Kumar, Magneto Rheological Fluid Based Smart Automobile Brake and Clutch Systems, Automotive Tribology. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-15-0434-1_13
26. Rakesh Jinaga, Shreedhar Kolekar, T Jagadeesha, Magneto Rheological Fluid Based Smart Automobile Brake and Clutch Systems, Automotive Tribology Springer Singapore 237-268,2019

Book Chapters accepted and in Press

1. Jagadeesha T. and Sandip Kunar, Cold Spray Additive Manufacturing: Principles, Applications, and Recent Advancements, Advances in Additive Manufacturing, Edited by Sandip Kunar and Jagadeesha T, John Wiley & Sons, Inc.2024
2. Jagadeesha T. and Sandip Kunar, Nano-Additives for Advanced Additive Manufacturing: Enhancing Quality, Sustainability and Performance, Advances in Additive Manufacturing Edited by Sandip Kunar and Jagadeesha T, John Wiley & Sons, Inc.2024
3. Jagadeesha T. and Sandip Kunar, Impacts of Additives on Failure Issues Linked with Additively Manufactured Products, Sustainability and Performance, Advances in Additive Manufacturing Edited by Sandip Kunar and Jagadeesha T, John Wiley & Sons, Inc.2024
4. Jagadeesha T. and Sandip Kunar, Integrating Metal Forming and Additive Manufacturing for Enhanced Product Quality and Efficiency, Advances in Additive Manufacturing, Edited by Sandip Kunar and Jagadeesha T, John Wiley & Sons, Inc.2024
5. Jagadeesha T. Arun Prakash J., Avinash Malladi and Seeniappan Kaliappan, Cold Spray Additive Manufacturing, New Materials, Processing and Manufacturability: Fabrication and Processing of Advanced Materials, (21–34) 2024 Scrivener Publishing LLC.2024
6. Biswajit Mallick, Jagadeesha T., Mothilal.T. and Seeniappan Kaliappan, Friction Stir Welding of Dissimilar Magnesium Alloys: Analytical Modelling, Simulation, and Experimental Validation, New Materials, Processing and Manufacturability: Fabrication and Processing of Advanced Materials, (247–268) 2024 Scrivener Publishing LLC.2024
7. Jagadeesha T., Manoj Nikam, T. Mothilal and M. D. Raj Kamal, New Materials, Processing and Manufacturability: Fabrication and Processing of Advanced Materials, (269–287)  2024 Scrivener Publishing LLC.2024
8. Jagadeesha T., Soundarrajan M., Seeniappan Kaliappan and M. D. Raj Kamal, Advancements in Electrochemical Surface Coatings: Innovations, Applications, and Future Prospects, New Materials, Processing and Manufacturability: Fabrication and Processing of Advanced Materials, (299–316) 2024 Scrivener Publishing LLC.2024
9. Jagadeesha T., Manoj Nikam, Seeniappan Kaliappan and Natrayan L. Process Variable Impact Analysis in Unconventional Machining: Enhancing MRR, Accuracy, and Surface Quality, New Materials, Processing and Manufacturability: Fabrication and Processing of Advanced Materials, (317–334) 2024 Scrivener Publishing LLC. 2024
10. Jagadeesha T.1, Amith Kumar Gajakosh, Seeniappan Kaliappan and S. Socrates. Pulsed Power Supplies for Surface Coating Applications: Methods, Materials, and Case Studies, New Materials, Processing and Manufacturability: Fabrication and Processing of Advanced Materials, (335–350) 2024 Scrivener Publishing LLC.2024
11. Jagadeesha T, Abrasive Jet Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
12. Jagadeesha T, Ultrasonic Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
13. Jagadeesha T, Water Jet Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
14. Jagadeesha T, Electro discharge Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
15. Jagadeesha T, Wire Electro discharge Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
16. Jagadeesha T, Electron Beam Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
17. Jagadeesha T, Chemical Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
18. Jagadeesha T, Plasma beam Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
19. Jagadeesha T, Ion Beam Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
20. Jagadeesha T, Laser Beam Machining, Advanced Machining and Micromachining Processes, Edited by Sandip Kunar, Norfazillah Talib, Gurudas Mandal, John Wiley & Sons, Inc.2024
21. Joel Sebastian, Juan raj, Jayakrishnan, Edwin roy, Jagadeesha T, Reduction of Vibrations Using Variable Damping Torsional Dampers for Smart Vehicles Using Real-Time Intelligent Smart Fluid Controls. Springer Nature, 2024. ( eproof submitted on 2/8/24)

                                                                                                      Book In press

 Book Series Editor 

 Advanced and Computational Production Techniques 

CRC PRESS , TAYLOR AND FRANCIS GROUP, USA

Sandip Kunar and Jagadeesha T

Patents Granted

1. Indian Patent Granted: Low cost walking beam mechanism (Patent no 512748 and Patent application no 201741033681). Patent Granted on 20/02/2024. Patent filed on 22/09/2017.
2. Indian Patent Granted: Low Cost Cutter for Cutting Hot Billets and Hot Pipes While in Motion" (Patent no 453859 and Application No 201741016730). Patent Granted on 22/09/2023. Filing date 12/05/2017
3. Indian Patent Granted: A Modular Magneto Rheological Fluid Clutch Apparatus.   (Patent No 507563 No.202341036658 A) Patent Granted on 6/2/2024. Patent filed on 26/05/2023
4. Australian Patent Granted: A system for dynamic vibration absorber and method of operation thereof. Patent No 2021102312.Patent Granted on  16/06/2021
5. Australian Patent Granted: A Magento rheological fluid composition with enhanced yield stress. Patent no 2021105873. Patent granted on 17/11/2021
6. Australian Patent Granted: A method for optimising single point cutting tool with textured surfaces Patent no 2021105876. Patent granted on 10/11/2021
7.  German Patent Granted: A cryogenic processing system with integrated cryo processing of improved cutting insert. Patent No 202021105683. Patent granted on 26/10/2021 ( Ein Kryogenes Bearbeitungssystem Mit Intergierter Kryobeareitung von Verbesserten schneeideinsatzen) Tag der Eintragung 26.10.2021.
8. Indian Patent Application No. 202341049453A  Magnetorheological Fluid Damper for Variable Valve Actuation to Improve Engine Performance–  202341049453  Patent Granted on 05/06/2024. Patent filed on 21/07/2023

Patent Applied and in progress.

1. Indian Patent Application Number: 202241036483 entitled: “"A Magnetorheological Fluid Based Dynamic Vibration Absorber System"”; Applicant:  National Institute of Technology Nit Calicut Having Address Nit Calicut 673601 Kerala – First Examination report submitted
2. Indian Patent Application Number: 202241036485 entitled: “"A Magnetorheological Fluid-Based Braking System for Two Wheelers Applicant:  National Institute of Technology Nit Calicut Having Address Nit Calicut 673601 Kerala – First Examination Report Submitted
3. Synthesis and Characterization of a new Magneto rheological fluid using Punnai oil. Applicant:  National Institute of Technology Nit Calicut Having Address Nit Calicut 673601 Kerala – Difference report submitted- Application in progress.
4. Magnetorheological Fluid based Rotary Damper as primary damper for Automotive Suspension system Applied Applicant:  National Institute of Technology Nit Calicut Having Address Nit Calicut 673601 Kerala – Application in progress.

Funded Projects

1. Vaibhav fellowship: Development of Lightweight, High Performance Multicomponent Mg-Based Materials for Industrial Applications. International Faculty: Professor Manoj Gupta National university of Singapore. 
2. Development of Energy-Efficient Lightweight Magnesium alloys and its Characterization for Mitigating Global Warming, NITC/DEAN(R&C)/SPARC-MoE/JGT/MED/2023-24. Sanction order no. SPARC/2019-2020/P2330/SL dated 28.07.2023. Amount 42,19,006. SPARC, International Faculty Professor Manoj Gupta National university of Singapore. 
3. Development of Organic Oil based MR fluid and experimenting with surface tempering effect in MR brake system. KSCSTE – TDAP Scheme. Amount 4,00,000.
4. Design, synthesis, fabrication and testing of Magnetorheological elastomers for VSVD Vibrations isolation.
5. Design, fabrication and product development of MR based semi-active controlled prosthetic legs for above knee amputees
6. Design, fabrication and testing of low-cost innovative MR based rotary dampers for automotive suspension systems.
7. Fabrication, development and testing of low-cost innovative MR elastomer based soft grippers
8. Innovative MR Clutch for efficient torque transmission in four wheelers
9. Design development, and testing of innovative variable valve technology using MR fluid damper for engine valve
10. Design, Analysis and Testing of Magnetorheological Fluid (MRF) Based Variable Braking Force System in a Two-Wheeler
11. Design, Development and Testing of An Innovative Low-Cost Magneto Rheological Fluid Based Dynamic Vibration Absorber
12. Synthesis and Characterization of Magneto Rheological Fluid and their Application in Braking System, 

P G Guidance (Selected List)

1. Design, Synthesis, fabrication and testing of MRE based Variable stiffness and variable damper vibration isolator
2. Enhancing Bone-Implant Interface: Laser Textured Titanium Alloy with Multi-Bio coating for Improved Osseointegration
3. Evaluation of hydroxyapatite coating on medical grade 316 L-SS surface for biomedical application using electrochemical process
4. Effect of MRR, TWR and SR in powder mixed EDM Process with help of simulation and experimental Investigation.
5. Experimental Investigation and Modelling of Turning Operation In Super Duplex Stainless Steel SDSS 2507 With Single Point Textured Tool With Minimum Quantity Lubricant
6. Modelling and Simulation of Magneto-Rheological (MR) Dampers for Machine Tool Applications.
7. Dynamic Characteristics Analysis of Polymer Concrete Machine Tool Structure
8. Fatigue Crack Growth Studies on Additively Manufactured Component Under Constant Amplitude Loading
9. Development and Study of Mechanical Properties Of Natural Fiber And MWCNT Reinforced PLA Hybrid Green Composite
10. Study of Mechanical Properties and Wear Behaviour of Al 5083aluminum Matrix Hybrid Composite Reinforced with MWCNT And Zro2
11. Fabrication and Testing of Asymmetric Gear 
12. Effects of Surface Characteristics and Residual Stresses on Fatigue Life of End Milled Nimonic 263 Alloy
13. Evaluation of Tool Temperatures and Cutting Forces of Inconel 718 Under Dry and Cryogenic Conditions
14. Effect of Minimum Quality Lubrication (MCQ), Wet and Dry Lubrication on Functional Behaviour of End-Milled Nimonic-263
15. Evaluation of hydroxyapatite- and zinc-coated Ti-6Al-4V surface for biomedical application using electrochemical process
16. Comparative Study and Its Performance of Spur Gear with Wire Cut EDM and Hobbing Process: An Experimental and Analytical Approach
17. Development of smart dampers for machine tool application using MR Fluid
18. Design for Additive Manufacturing (Bionic Design Approach) with subsequent manufacturing feasibility analysis and performance evaluation ( in association with TATA motors)
19. Process Capability Improvement Using Internally Cooled Cutting Tool Insert in Cryogenic Machining of Super Duplex Stainless Steel 2507
20. Mechanics and Dynamics of Milling Super Duplex Stainless Steel 2507 Using Regular, Variable Geometry and High Feed Cutters (in association with IIT Kanpur, Prof Mohit Law)
21.  Mechanics and Dynamic Stability in Turning of Super Duplex Stainless Steel 2507 ( in association with IIT Kanpur . Prof. Mohit Law)

https://estore.linuxpert.in/fluid-power-control-dvd.html

UG Guidance (Selected List)

1. Design, fabrication and testing of low-cost innovative MR based rotary dampers for automotive suspension systems
2. Design, fabrication and product development of MR based semi-active controlled prosthetic legs for above knee amputees
3. Fabrication, development and testing of low-cost innovative MR elastomer based soft grippers
4. Assessment of Drought Vulnerability Using AHP and GIS.
5. Innovative MR clutch for efficient torque transmission in four wheelers.
6. Design development, and testing of innovative variable valve technology using MR fluid damper for engine valve
7. Cost Reduction Projects on Sheet Metal (in association with LAM Research, Bangalore)
8. Design and development of variable damping torsional dampers for small diesel engines using MR fluids
9. Design and Development of a Control System and Experimental Setup for Real Time Monitoring of Variable Force Sensing MRF Brakes for Two Wheelers
10. Design, Analysis and Testing of Magnetorheological Fluid (MRF) Based Variable Braking Force System in a Two-Wheeler
11. Design, Development and Testing of An Innovative Low-Cost Magneto Rheological Fluid Based Dynamic Vibration Absorber
12. Design, Development and testing of innovative low-cost MR motion control with optimised rib geometry for automotive applications.
13. Bearing fault detection from vibration signal using ML and DL algorithms
14. Design and Fabrication of Piezoelectric Energy Harvester Under Parametric Excitation
15. Design, fabrication, control and testing prosthetic leg for above-knee amputees using MR Fluid
16. Synthesis and Characterization of Magneto Rheological Fluid and their Application in Braking System
17. Development of twin tube Magnetorheological Damper and testing
18. Design, Fabrication and Testing of Magnetorheological Fluid Braking System
19. Tribological and mechanical characterisation of Aluminium Magnesium composite in Engine piston
20. Synthesis and Characterization of Magneto Rheological Fluid and their Application in Braking System

PhD Guidance

Awarded

1. Synthesis of Organic Oils Blended Magnetorheological Fluids and their Application in Braking System- Dr. Rakesh Jinaga Erappa. (2021)
2. Experimental Investigation on the Effect of Tool Nomenclature and Machining Conditions on the Machining and Material Behaviour During End Milling of Nimonic 263 Alloy – Dr. Gowthaman (2021)

Ongoing (Full time)

1. Synthesis, characterization and testing of biodegradable oils for machining applications. Mr.Maneesh Kumar P.V (2021 admission). Co guide: Prof Unnikrishnan, Department of Chemistry
2. Synthesis, Development and Characterisation of Light Weight Magnesium Alloys. Mr. Jibin George (2023 admission).

Ongoing (Part time)

1. Synthesis and characterization of Low-cost Briquettes for Engineering Application Mr. Athul S Aravind (2022 admission). Now with NHPC Ltd. Govt of India. Co guide: Dr. Sujith Kumar C.S.

Ongoing (External)

1. Hemant Kumar Pant: Dr. Amit Kumar Singh (Main Guide). Dr. Jagadeesha T (Coguide)
2. Bharath K L: Dr. Jagadeesha T (Main Guide) and Dr. Amit Kumar Singh (Coguide)

National Programmes Conducted

1. Six days Advanced Entrepreneur Skill development programme on Low Cost Integrated Industrial Automation, 18-12-2023 to 23-12-2023 organised by Department of mechanical engineering, NIT Calicut funded by MSME, Ministry of Micro, Small & Medium Enterprises, Govt of India. 
2. GIAN programme The Promise of Magnesium technology in Engineering and Biomedical Applications in 21st Century and Beyond: 21/11/2023 to 25/11/2023, International Faculty Prof Manoj Gupta, National University of Singapore
3. 5 days workshop on Low cost automation technologies and digital manufacturing. 
4. TEQIP Sponsored FDP on Advances in Industrial Automation Fluid Power Control Technologies In twinning with Department of Mechanical Engineering Govt. Engineering College Bharathpur Rajasthan
5. DST- SERB Sponsored FDP Advances in welding and material processing
6. TEQIP and AICTE sponsored FDP on Industrial Tribology and its application
7. TEQIP and AICTE sponsored FDP on Advances in FEM to solve engineering problems
8. TEQIP and AICTE sponsored FDP on Modern Pneumatic control
9. TEQIP and AICTE sponsored FDP on Design of Press tools, Jigs and Fixtures
10. TEQIP and AICTE sponsored FDP on Recent developments in Fluid power control

National Workshop Conducted (Sponsored by TEQIP and AICTE)

1. National workshop on Pneumatic design using FESTO software
2. National workshop on pure, electro and PLC based pneumatics
3. National workshop on High temperature materials with IGCAR
4. National workshop on Industrial hydraulics and Mechatronics
5. National workshop on Finite element analysis using ANSYS

1. Associate Professor, NIT Calicut ( 2010 - till date)

2.Associate Professor , SJEC Mangalore ( 2008 to 2010)

3. Assistant Professor , AIT Chickmagalure ( 2005-2008)

4. Adhoc Lecturer , KREC (NIT) Surathkal ( 1990-1991)

1. ST Microelectronics Private Limited, Singpore ( 2003- 2005), Process Engineering Department

2. APP Systems and Services, Singapore ( 2001 - 2002), Application Engineering Department

3. Applied Materials South East Asia Pvt Limited, Singapore (2000-2001), Process Engineering Department

4. ASM Technology Pvt Limited, Singapore ( 1997-1999),  Wire Bonder R and D Department

5. IBM Singapore Pvt Limited, Singapore ( 1995-1997),  Production Engineering Department

6. Tata Engineering and Locomotive Company (TELCO), Pune (1993-1995), Design Engineering Department

7. Harith Grammer ( TVS Suzuki) ( 1990-1991)  ( Graduate Engineer Trainee), Design Department .

1. B. E ( Mechanical Engineering), KREC ( NIT) Surathkal

2. M. E ( Machine Tools Engineering) , PSG College of Technology , Coimbatore

3. M.S  ( Manufacturing and Automation), National University of Singapore

4. M.S  ( Advanced Materials) , Singapore MIT Alliance, SMA, Singpore

5. Ph.D ( JNTU,Hydrabad)

Reviewer

Journal Reviewer

1.  International Journal of Manufacturing Research

2. Engineering Science and Technology, an International Journal

3. Silicon

4. Hybrid Advances

5. Measurement

6. Polymers

7. Journal of The Institution of Engineers (India)

8. Journal of Polymer Materials

9. Journal of Energy Research and Reviews

10. Vibration

11. Journal of Expert Systems with Applications

12. Functional Composites and Structures

13. Journal of Mechanical Engineering Science

14. AIMTDR 2018

Books reviewer

1. McGraw Hill
2. John Wiley Pvt Limited
3. Pearson Publishers

FDP and Workshop attended from 2021 to 2024 will be updated soon.

Memberships

1. The Indian Society for Technical Education, Life member

2. National Society of Fluid mechanics and Fluid power, Life member

3. The Combustion Institute ( Indian Section), Life member

4. The Institution of Engineers , Member

5. The Indian Institute of Metals, Life member

6. Tribology Society of India, Life member

7, International Association of Engineers

Certified Professional Engineer

 Certified Professional Engineer in Australia ( Licence no ASCO- XXXX-11 since 2003), Awarded by Institution of Engineers, Engineering House Australia, 

1. Manufacturing Science and Machine Tools

2. Modern Machining Processes

3. Characterisation of materials

4. Advanced materials processesing

5. Fluid power control ( Elective)

6. Computational Methods in Engineering ( Elective)

7.  Manufacturing Science 

8.  Computer aided design and manufacture ( Elective)

9.  Machine Tools and CNC machine 

10. Kinematics of Mechanism

11. Dynamics of Mechanism

12. Machine Design - 1

13  Machine Design - 2

14. Design of Machine Elements

15. Industrial Triblogy ( Elective)

16. Powder Metallurgy ( Elective)

17. Machine Tool vibration and noise control ( Elective)

18. Theory of vibration

19.  Engineering Mechanics

20.  Engineering Graphics

21.  Heat transfer ( at SJEC)

22  Basic Thermodynamics ( at SJEC)

23. Theory of IC enginees ( at AIT)

24  Advanced Thermodynamics ( at AIT)

25 Composite Materials ( at SJEC)

26. Finite Element Analysis ( at SJEC and AIT)

27. Mechatronics 

28. Introduction to Mechanical Engineering ( at AIT)

29. Casting and Welding